Still ClamAV not working

[Alain Spineux]

On Thu, Aug 7, 2008 at 1:40 PM, Saim Kim <s.kim at hia.rwth-aachen.de> wrote:
> Alain Spineux schrieb:
>>
>> On Tue, Aug 5, 2008 at 2:51 PM, Saim Kim <s.kim at hia.rwth-aachen.de> wrote:
>>
>>>
>>> Hello,
>>>
>>> I recompiled both the clamAV and gmp package locally on the server I'm
>>> using for Kolab. First gmp and then clamAV as recommended by Thomas in
>>> the German Newsgroup (Kolab-users-de Nachrichtensammlung, Band 4,
>>> Eintrag 7).
>>>
>>> At first I tried to remove the "old" versions (rpm from the mirror) and
>>> then install the newly compiled versions of clamAV and gmp and ran
>>> kolabconf -that didn't work.
>>> Then I completely removed kolab incl. openpkg and tried a fresh install
>>> with the two new packages: still won't work.
>>>
>>> Here are the commands I compiled them with: /kolab/bin/openpkg rpm
>>> --rebuild /kolab2.2release/source/PACKETSOURCE_DATEI.src.rpm
>>> Any hints to get it running again?
>>>
>>
>> What is not working ?
>> Any error messages ?
>>
>
> Hello Alain,
>
> I didn't get any compiler errors and also kolab installation and bootstrap
> went error free. But still clamAV is marked as not active (it is set active
> in the kolab interface). I used the openpkg build commands as described in
> my email. How did you recompile and install the gmp and clamAV packages and
> in which order? Thanks!

>From this mailing list, with subject  :  Kolab Security Issue 20
20080416 (clamav)

The package can be installed on your Kolab Server with

# /kolab/bin/openpkg rpm --rebuild clamav-0.93-20080414_kolab.src.rpm
# /kolab/bin/openpkg rpm \
 -Uvh /kolab/RPM/PKG/clamav-0.93-20080414_kolab.<ARCH>-<OS>-kolab.rpm
# rm /kolab/etc/clamav/*.rpmsave
# /kolab/bin/openpkg rc clamav stop
# /kolab/bin/openpkg rc clamav start
# su - kolab-r
$ freshclam
$ rm -r /kolab/share/clamav/*.inc

Hope this help

>
> I'll try to build the complete kolab sources locally and check again and let
> you know if it worked.
>
> Best regards,
> Saim
>>
>>
>>>
>>> Best regards,
>>> Saim
>>>
>>> --
>>>
>>> --------------------------------------------------------------------------
>>> Dipl.-Ing. Saim Kim
>>> Lehrstuhl fuer Medizinische Informationstechnik
>>> Helmholtz-Institut fuer Biomedizinische Technik
>>> RWTH Aachen
>>> Pauwelsstr. 20, D-52074 Aachen
>>> ---
>>> Web:   http://www.medit.hia.rwth-aachen.de/
>>> Tel:   +49-(0)241-80 23218
>>> Fax:   +49-(0)241-80 82442
>>> email: s.kim at hia.rwth-aachen.de
>>>
>>> --------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Kolab-users mailing list
>>> Kolab-users at kolab.org
>>> https://kolab.org/mailman/listinfo/kolab-users
>>>
>>>
>>
>>
>>
>>
>
>
> --
> --------------------------------------------------------------------------
> Dipl.-Ing. Saim Kim
> Lehrstuhl fuer Medizinische Informationstechnik
> Helmholtz-Institut fuer Biomedizinische Technik
> RWTH Aachen
> Pauwelsstr. 20, D-52074 Aachen
> ---
> Web:   http://www.medit.hia.rwth-aachen.de/
> Tel:   +49-(0)241-80 23218
> Fax:   +49-(0)241-80 82442
> email: s.kim at hia.rwth-aachen.de
> --------------------------------------------------------------------------
>



-- 
Alain Spineux
aspineux gmail com
May the sources be with you