[Fwd: Re: [Z-Push-dev] Nokia N900 and Z-push 1.3 RC]

[Alain Abbas]

hi
the solution for now is to downgrade to zpush 1.2.3 with the backend 
kolab 0.4
the problem is a zpush problem (provisioning) who is not supported by 
the N900 ,  not a backend problem 
regards

Alain

wp1133599-user a écrit :
> Hi Sorry for not answering so long but I have been busy.
>
> Out Front: I haven't been able to read the mailinglist regularly so please
> be patient if I repeat or missed something.
>
> First : I can confirm Thorstens findings. I too always get an initial
> sync. Did you guys figure out the problem with this?
> Second: Compared to 0.3 I keep losing contact information on syncs ...
> which might be related to it being an initial sync and non of the data
> entered into the phone seems to reach the server.
>
> Do you guys think it would be possible to find a date and time to get
> together in IRC or any other Instant Messenger to talk, maybe even VOIP. I
> would appreciate if Alain could tell me a little about his plans with the
> kolab connector and some information how it works. Since I would like to
> take on the task to create a better working Syncronization Application for
> the N900 which at least works with kolab. And I would like to know how
> Thorsten is doing with the N900.
>
> Maybe you can include me in your private email conversation.
>
> Thanks
> Alexander
>
> Am Samstag, den 24.04.2010, 02:01 +0200 schrieb Thorsten Schnebeck
> <thorsten.schnebeck at gmx.net>:
>   
>> Am Freitag 23 April 2010 23:45:17 schrieben Sie:
>>     
>>> hi Thorsten
>>>
>>> see the attached message
>>> Alain,
>>>
>>>  Von: Sebastian Kummer <s.kummer at zarafaserver.com.br>
>>>       
>>>> I would say it's related to the provisioning which was introduced in
>>>> 1.3.
>>>> I'm not sure if the N900 supports it as until today I had no device
>>>> "in hands" for testing.
>>>>
>>>> Try enabling the loose-provisioning (z-push config). If that also
>>>>         
> does
>   
>>>> not help, disable provisioning completely
>>>> (parameter provisioning).
>>>>
>>>> Cheers,
>>>> Sebastian
>>>>
>>>> PS. Any hints in the debug log?
>>>>         
>>> Regards
>>>
>>>       
>> Hi Alain,
>>
>> from the N900-MfE Wiki:
>>     
>>> Known issues
>>> Provisioning
>>> N900 is considered to be "non provisioning device" from Exchange server
>>> point of view. It basically means that it can
>>> not be managed from Exchange server - administrator can not wipe your
>>> device, request you to use autolock and so on.
>>> Basically, all the provisioning data received from the server is
>>>       
> ignored
>   
>>> and the server is informed that N900 MfE
>>> does not support this feature. Exchange administrator can configure the
>>> server in two ways - he/she can allow to use
>>> non-provisioning devices or disallow. In the second case N900 MfE will
>>> not work as server will reject the
>>> connection.
>>>       
>> I used the new released z-push-1.3
>>
>> first I test "loose_provisioning" -> does not work
>> Then I changed provisioning to false -> does not work
>>
>> Then I update 1.2.3_RC to 1.2.3 -> works
>>
>> Is not there another fundamental change between 1.2.x and 1.3:
>> For 1.2.x I have to patch diffbackend.php with this
>>
>> +    function syncstate($state)
>> +    {
>> +        $this->_state=$state;
>> +    }
>>
>> This was not necessary any longer when supporting 1.3 but something I
>> would call "syncstate" is exactly my problem with 1.3 as every sync
>>     
> behaves
>   
>> like the first sync(?)
>>
>> Bye
>>
>>   Thorsten
>>
>> _______________________________________________
>> Kolab-users mailing list
>> Kolab-users at kolab.org
>> https://kolab.org/mailman/listinfo/kolab-users
>>