Login Failed

Hector Tapia htapia at csc.com
Mon Apr 13 18:20:40 CEST 2015


Mateusz,

You are right...I am using the distro version by mistake.  I set yum 
priority to prioritize Centos Base over the Kolab repo by mistake.  I 
realize now that I started using yum priority after my initial Kolab 
installation and then copied over the repo config files after my server 
reinstall but before I installed Kolab.  I have the proper version in 
place and everything is working again.

Thanks!

Hector



This is a PRIVATE message. If you are not the intended recipient, please 
delete without copying and kindly advise us by e-mail of the mistake in 
delivery. NOTE: Regardless of content, this e-mail shall not operate to 
bind CSC to any order or other contract unless pursuant to explicit 
written agreement or government initiative expressly permitting the use of 
e-mail for such purpose. • Welkin Associates, Ltd. Address: 4801 
Stonecroft Boulevard, Suite 210, Chantilly, Virginia 20151




From:   Mateusz Kijowski <mateusz.kijowski at gmail.com>
To:     Hector Tapia/USA/CSC at CSC
Cc:     "users at lists.kolab.org" <users at lists.kolab.org>
Date:   04/10/2015 04:34 PM
Subject:        Re: Login Failed



Hmm, seems that you have distro version on cyrus (which would also explain 
the missing date extension) - on my Centos 6 host:

# rpm -qa cyrus-imapd
cyrus-imapd-2.5-108.1.el6.kolab_3.4.x86_64

Perhaps some other packages are in wrong version?

Regards,


Mateusz.

2015-04-10 21:29 GMT+02:00 Hector Tapia <htapia at csc.com>:
All, 

I was recently testing out Kolab 3.4  on Centos 7 with a lot of success.  
During testing I upgraded to Centos 7.1 and also applied the Roundcube 
updates that recently appeared in the Kolab 3.4 repo. Everything worked 
great, so I decided to wipe the server and start with a fresh install of 
everything in preparation for a demo.  I immediately had problems with 
Cyrus-IMAP not starting due to a sieve extension issue that was resolved 
in another thread. 

Unfortunately, I can't log into roundcube now.  I tried changing passwords 
and creating new users, but they all fail.   

This is what I see in cat /var/log/roundcubemail/errors: 

[10-Apr-2015 13:40:44,000000 -0400]: <cukd2rcp> IMAP Error: Login failed 
for test.user at example.com from ###.###.###.###. LOGIN: Login only 
available under a layer in 
/usr/share/roundcubemail/program/lib/Roundcube/rcube_imap.php on line 198 
(POST /roundcubemail/?_task=login?_task=login&_action=login)

I used "kolab lm" to see if the mailbox had been created, but the command 
just hangs until I press control-c at which point I get this: 

2015-04-10 13:44:15,274 pykolab.imap WARNING Could not connect to Cyrus 
IMAP server 'imaps://localhost:993' 

I used the command, "nmap -sT -O localhost" to confirm that 993/tcp is 
open. 

Here is the output from "systemctl -l status cyrus-imapd": 

cyrus-imapd.service - Cyrus-imapd IMAP/POP3 email server 
   Loaded: loaded (/usr/lib/systemd/system/cyrus-imapd.service; enabled) 
   Active: active (running) since Fri 2015-04-10 10:25:34 EDT; 4h 42min 
ago 
  Process: 1108 ExecStartPre=/usr/lib/cyrus-imapd/cyr_systemd_helper start 
(code=exited, status=0/SUCCESS) 
 Main PID: 3944 (cyrus-master) 
   CGroup: /system.slice/cyrus-imapd.service 
           ├─ 3944 /usr/lib/cyrus-imapd/cyrus-master 
           ├─ 4002 idled 
           ├─ 4008 lmtpd 
           ├─ 4009 notifyd 
           ├─ 4012 pop3d 
           ├─ 4017 pop3d 
           ├─ 4018 imapd 
           ├─ 4019 pop3d 
           ├─ 4023 pop3d 
           ├─ 4028 imapd 
           ├─ 4073 imapd 
           ├─ 4690 pop3d 
           ├─ 4691 imapd 
           ├─ 7601 imapd 
           ├─ 7603 pop3d 
           ├─ 7632 imapd 
           ├─ 7634 ptloader 
           ├─12239 imapd 
           ├─12987 imapd 
           ├─16995 imapd 
           ├─25250 [imapd] 
           ├─25253 pop3d -s 
           ├─25255 imapd -s 
           └─30509 imapd 

Apr 10 15:08:06 host.exmple.com pop3s[25241]: pop3s: required OpenSSL 
options not present 
Apr 10 15:08:06 host.exmple.com imaps[25242]: imaps: required OpenSSL 
options not present 
Apr 10 15:08:06 host.exmple.com pop3s[25243]: pop3s: required OpenSSL 
options not present 
Apr 10 15:08:06 host.exmple.com pop3s[25245]: pop3s: required OpenSSL 
options not present 
Apr 10 15:08:06 host.exmple.com imaps[25246]: imaps: required OpenSSL 
options not present 
Apr 10 15:08:06 host.exmple.com pop3s[25247]: pop3s: required OpenSSL 
options not present 
Apr 10 15:08:06 host.exmple.com imaps[25251]: imaps: required OpenSSL 
options not present 
Apr 10 15:08:06 host.exmple.com imaps[25251]: Fatal error: imaps: required 
OpenSSL options not present 
Apr 10 15:08:06 host.exmple.com imaps[25250]: imaps: required OpenSSL 
options not present 
Apr 10 15:08:06 host.exmple.com imaps[25250]: Fatal error: imaps: required 
OpenSSL options not present 

Here is the output for "rpm -qa | grep openssl": 

openssl-libs-1.0.1e-42.el7.4.x86_64 
openssl-1.0.1e-42.el7.4.x86_64 

Here is the output for "rpm -qa | grep cyrus": 

cyrus-sasl-plain-2.1.26-17.el7.x86_64 
cyrus-sasl-lib-2.1.26-17.el7.x86_64 
cyrus-imapd-utils-2.4.17-8.el7_1.x86_64 
cyrus-sasl-2.1.26-17.el7.x86_64 
cyrus-sasl-md5-2.1.26-17.el7.x86_64 
cyrus-imapd-2.4.17-8.el7_1.x86_64 
cyrus-sasl-gssapi-2.1.26-17.el7.x86_64 

Finally, here is the output for "rpm -qa | grep php": 

php-ldap-5.4.16-23.el7_0.3.x86_64 
php-kolabformat-1.1.git.1422810799-29.1.el7.kolab_3.4.x86_64 
php-pear-Auth-SASL-1.0.6-5.el7.noarch 
php-Net-LDAP3-1.0.2-2.1.el7.kolab_3.4.noarch 
php-pear-HTTP-Request2-2.2.1-1.el7.noarch 
php-pear-DB-1.7.14-6.el7.noarch 
php-pear-MDB2-Driver-mysqli-1.5.0-0.8.b4.el7.noarch 
php-ZendFramework-1.12.5-11.1.el7.kolab_3.4.noarch 
php-mbstring-5.4.16-23.el7_0.3.x86_64 
php-cli-5.4.16-23.el7_0.3.x86_64 
php-pear-Net-Socket-1.0.14-1.el7.noarch 
php-pear-Net-LDAP2-2.0.12-20.1.el7.kolab_3.4.noarch 
php-pear-Net-URL2-2.1.1-1.el7.noarch 
php-pear-Net-Sieve-1.3.4-1.el7.noarch 
php-mysql-5.4.16-23.el7_0.3.x86_64 
php-bcmath-5.4.16-23.el7_0.3.x86_64 
php-common-5.4.16-23.el7_0.3.x86_64 
php-Smarty-3.1.21-1.el7.noarch 
php-pear-1.9.4-21.el7.noarch 
php-pear-Mail-Mime-1.8.9-1.el7.noarch 
php-pear-Net-IDNA2-0.1.1-10.el7.noarch 
php-pear-Mail-1.2.0-7.el7.noarch 
php-pdo-5.4.16-23.el7_0.3.x86_64 
php-kolab-0.6.0-3.el7.kolab_3.4.x86_64 
php-mcrypt-5.4.16-3.el7.x86_64 
php-xml-5.4.16-23.el7_0.3.x86_64 
php-process-5.4.16-23.el7_0.3.x86_64 
php-pear-Net-SMTP-1.6.2-1.el7.noarch 
php-pear-MDB2-2.5.0-0.9.b5.el7.noarch 
php-pear-Mail-mimeDecode-1.5.5-7.el7.noarch 
php-5.4.16-23.el7_0.3.x86_64 
php-gd-5.4.16-23.el7_0.3.x86_64 

I'm also going to list the content of my /etc/imap.conf: 

configdirectory: /var/lib/imap 
partition-default: /var/spool/imap 
admins: cyrus-admin 
sievedir: /var/lib/imap/sieve 
sendmail: /usr/sbin/sendmail 
sasl_pwcheck_method: auxprop saslauthd 
sasl_mech_list: PLAIN LOGIN 
allowplaintext: no 
tls_server_cert: /etc/pki/cyrus-imapd/cyrus-imapd.pem 
tls_server_key: /etc/pki/cyrus-imapd/cyrus-imapd.pem 
# uncomment this if you're operating in a DSCP environment (RFC-4594) 
# qosmarking: af13 
auth_mech: pts 
pts_module: ldap 
ldap_servers: ldap://localhost:389 
ldap_sasl: 0 
ldap_base: dc=example,dc=com 
ldap_bind_dn: uid=kolab-service,ou=Special Users,dc=example,dc=com 
ldap_password: xxx 
ldap_filter: 
(|(&(|(uid=cyrus-admin)(uid=cyrus-murder))(uid=%U))(&(|(uid=%U)(mail=%U@%d)(mail=%U@%r))(objectclass=kolabinetorgperson))) 

ldap_user_attribute: mail 
ldap_group_base: dc=example,dc=com 
ldap_group_filter: 
(&(cn=%u)(objectclass=ldapsubentry)(objectclass=nsroledefinition)) 
ldap_group_scope: one 
ldap_member_base: ou=People,dc=example,dc=com 
ldap_member_method: attribute 
ldap_member_attribute: nsrole 
ldap_restart: 1 
ldap_timeout: 10 
ldap_time_limit: 10 
unixhierarchysep: 1 
virtdomains: userid 
annotation_definitions: /etc/imapd.annotations.conf 
sieve_extensions: fileinto reject envelope body vacation imapflags notify 
include regex subaddress relational copy 
allowallsubscribe: 0 
allowusermoves: 1 
altnamespace: 1 
hashimapspool: 1 
anysievefolder: 1 
fulldirhash: 0 
sieveusehomedir: 0 
sieve_allowreferrals: 0 
lmtp_downcase_rcpt: 1 
lmtp_fuzzy_mailbox_match: 1 
username_tolower: 1 
deletedprefix: DELETED 
delete_mode: delayed 
expunge_mode: delayed 
postuser: shared 

Am I missing an openssl package or is their something in a config file 
that I should change? 

Thanks! 

Hector 
_______________________________________________
users mailing list
users at lists.kolab.org
https://lists.kolab.org/mailman/listinfo/users


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kolab.org/pipermail/users/attachments/20150413/e8c45f2b/attachment-0001.html>


More information about the users mailing list