Kolab Z-push

[Nazeer]

When its enabled on the BB, its fine... only when its enabled on the iPhone does it do this



-----Original Message-----
From: Bogomil Shopov [mailto:shopov at kolabsys.com] 
Sent: 27 December 2010 09:59 PM
To: Nazeer
Cc: 'Alain Abbas'; kolab-users at kolab.org
Subject: Re: Kolab Z-push

On Monday, December 27, 2010 09:59:32 pm Nazeer wrote:
> After enabling the mail... my CPU skyrockets to 100% for those apache 
> process

Using Iphone and/or BB?

> 
> -----Original Message-----
> From: Alain Abbas [mailto:alain.abbas at libertech.fr]
> Sent: 27 December 2010 02:55 PM
> To: Nazeer
> Cc: 'Bogomil Shopov'; kolab-users at kolab.org
> Subject: Re: Kolab Z-push
> 
> The problem is sporadic
> try to enable one by one Contact and Calendar try to watch in the 
> access.log if you have a line : modified on server .....
> that come all the time
> 
> 
> Alain
> 
> Nazeer a écrit :
> > I enabled my contact 15min agao and its still working fine... ill 
> > give it a few minutes then enable something else...
> > 
> > -----Original Message-----
> > From: Bogomil Shopov [mailto:shopov at kolabsys.com]
> > Sent: 27 December 2010 01:55 PM
> > To: Nazeer
> > Cc: 'Alain Abbas'; kolab-users at kolab.org
> > Subject: Re: Kolab Z-push
> > 
> > On Monday, December 27, 2010 01:47:24 pm Nazeer wrote:
> >> I killed all those processes... restarted Apache... and disabled 
> >> mail, contacts and calendar on my iphone. I left the BB on and sent 
> >> a mail there and it works fine on the BB... Processor is running at 
> >> 6.6% all the time now... ill run it like this for a few minutes.
> >> Should I enable mail first
> > 
> > Let's start with contacts
> > 
> >> on my iphone or contacts? I want to enable one by one on my iphpne 
> >> to see whats causing the spike
> >> 
> >> -----Original Message-----
> >> From: Bogomil Shopov [mailto:shopov at kolabsys.com]
> >> Sent: 27 December 2010 01:21 PM
> >> To: Nazeer
> >> Cc: 'Alain Abbas'; kolab-users at kolab.org
> >> Subject: Re: Kolab Z-push
> >> 
> >> On Monday, December 27, 2010 12:59:48 pm Nazeer wrote:
> >>> Should I disable contacts syncing and check if CPU still runs up 
> >>> to 100%?
> >> 
> >> This needs a lot of testing :) Can you kill the processes (if your 
> >> mashine allows that) and to try to use only zPush? and to monitor 
> >> the processes wile sync?
> >> 
> >> //Bogo
> >> 
> >>> Right now I have 3 processes running of /kolab/sbin/apache. And 
> >>> one is 40.8&, another is 30.6% and the last one is 26.3% processor 
> >>> usage and the total processor usage is staying at 100% now
> >>> 
> >>> The time for each process is 32:33.96, 20:29.21, 29:31.21 
> >>> respectively
> >>> 
> >>> -----Original Message-----
> >>> From: Alain Abbas [mailto:alain.abbas at libertech.fr]
> >>> Sent: 27 December 2010 12:49 PM
> >>> To: Bogomil Shopov
> >>> Cc: Nazeer; kolab-users at kolab.org
> >>> Subject: Re: Kolab Z-push
> >>> 
> >>> Hello Bogo
> >>> 
> >>> I had the case on a server 100% cpu , and 10 contacts are syncing 
> >>> always ( like if the contacts was continuolsy modified) I noticed 
> >>> that the process number was not the process number of the current 
> >>> sync like if there are an infinite loop on the backend or on zpush.
> >>> 
> >>> Alain
> >>> 
> >>> Bogomil Shopov a écrit :
> >>>> On Monday, December 27, 2010 12:29:09 pm Nazeer wrote:
> >>>>> Two phones are syncing... iPhone 4 and a Black berry
> >>>>> 
> >>>>> With the Blackberry, its just the mail
> >>>>> 
> >>>>> With the iphone is the mail, calendars and contacts that are set 
> >>>>> to sync
> >>>> 
> >>>> Two phones at the same time? How may contacts/mail/calendars do 
> >>>> you have? (approx)
> >>>> 
> >>>>> -----Original Message-----
> >>>>> From: Bogomil Shopov [mailto:shopov at kolabsys.com]
> >>>>> Sent: 27 December 2010 12:21 PM
> >>>>> To: Nazeer
> >>>>> Cc: kolab-users at kolab.org
> >>>>> Subject: Re: Kolab Z-push
> >>>>> 
> >>>>> On Monday, December 27, 2010 12:17:15 pm Nazeer wrote:
> >>>>>> Thanks
> >>>>>> 
> >>>>>> I got it to work
> >>>>>> 
> >>>>>> Has anyone else ever experienced Z-push consuming processor power?
> >>>>>> To be specific, the /kolab/sbin/apache? It spikes randomly to 
> >>>>>> 100% and sometimes It stays there until I restart
> >>>>> 
> >>>>> Can you give me more details, please. How mych objects are you 
> >>>>> trying to sync and what phone do you use?
> >>>>> 
> >>>>> Thanks,
> >>>>> Bogo

-- 

Bogomil "Bogo" Shopov
Senior Web Engineer

Kolab Systems AG
Zürich, Switzerland

e: shopov at kolabsys.com
t: +49 251 871 369 77
w: http://kolabsys.com

pgp: E69A226A Bogomil "Bogo" Shopov