Kolab Z-push

[Alain Abbas]

The problem is sporadic
try to enable one by one Contact and Calendar
try to watch in the access.log if you have a line :
modified on server .....
that come all the time


Alain


Nazeer a écrit :
> I enabled my contact 15min agao and its still working fine... ill give it a few minutes then enable something else... 
>
> -----Original Message-----
> From: Bogomil Shopov [mailto:shopov at kolabsys.com] 
> Sent: 27 December 2010 01:55 PM
> To: Nazeer
> Cc: 'Alain Abbas'; kolab-users at kolab.org
> Subject: Re: Kolab Z-push
>
> On Monday, December 27, 2010 01:47:24 pm Nazeer wrote:
>   
>> I killed all those processes... restarted Apache... and disabled mail, 
>> contacts and calendar on my iphone. I left the BB on and sent a mail 
>> there and it works fine on the BB... Processor is running at 6.6% all 
>> the time now... ill run it like this for a few minutes. Should I 
>> enable mail first
>>     
>
> Let's start with contacts
>   
>> on my iphone or contacts? I want to enable one by one on my iphpne to 
>> see whats causing the spike
>>
>> -----Original Message-----
>> From: Bogomil Shopov [mailto:shopov at kolabsys.com]
>> Sent: 27 December 2010 01:21 PM
>> To: Nazeer
>> Cc: 'Alain Abbas'; kolab-users at kolab.org
>> Subject: Re: Kolab Z-push
>>
>> On Monday, December 27, 2010 12:59:48 pm Nazeer wrote:
>>     
>>> Should I disable contacts syncing and check if CPU still runs up to 100%?
>>>       
>> This needs a lot of testing :) Can you kill the processes (if your 
>> mashine allows that) and to try to use only zPush? and to monitor the 
>> processes wile sync?
>>
>> //Bogo
>>
>>     
>>> Right now I have 3 processes running of /kolab/sbin/apache. And one 
>>> is 40.8&, another is 30.6% and the last one is 26.3% processor usage 
>>> and the total processor usage is staying at 100% now
>>>
>>> The time for each process is 32:33.96, 20:29.21, 29:31.21 
>>> respectively
>>>
>>> -----Original Message-----
>>> From: Alain Abbas [mailto:alain.abbas at libertech.fr]
>>> Sent: 27 December 2010 12:49 PM
>>> To: Bogomil Shopov
>>> Cc: Nazeer; kolab-users at kolab.org
>>> Subject: Re: Kolab Z-push
>>>
>>> Hello Bogo
>>>
>>> I had the case on a server 100% cpu , and 10 contacts are syncing 
>>> always ( like if the contacts was continuolsy modified) I noticed 
>>> that the process number was not the process number of the current 
>>> sync like if there are an infinite loop on the backend or on zpush.
>>>
>>> Alain
>>>
>>> Bogomil Shopov a écrit :
>>>       
>>>> On Monday, December 27, 2010 12:29:09 pm Nazeer wrote:
>>>>         
>>>>> Two phones are syncing... iPhone 4 and a Black berry
>>>>>
>>>>> With the Blackberry, its just the mail
>>>>>
>>>>> With the iphone is the mail, calendars and contacts that are set 
>>>>> to sync
>>>>>           
>>>> Two phones at the same time? How may contacts/mail/calendars do 
>>>> you have? (approx)
>>>>
>>>>         
>>>>> -----Original Message-----
>>>>> From: Bogomil Shopov [mailto:shopov at kolabsys.com]
>>>>> Sent: 27 December 2010 12:21 PM
>>>>> To: Nazeer
>>>>> Cc: kolab-users at kolab.org
>>>>> Subject: Re: Kolab Z-push
>>>>>
>>>>> On Monday, December 27, 2010 12:17:15 pm Nazeer wrote:
>>>>>           
>>>>>> Thanks
>>>>>>
>>>>>> I got it to work
>>>>>>
>>>>>> Has anyone else ever experienced Z-push consuming processor power?
>>>>>> To be specific, the /kolab/sbin/apache? It spikes randomly to 
>>>>>> 100% and sometimes It stays there until I restart
>>>>>>             
>>>>> Can you give me more details, please. How mych objects are you 
>>>>> trying to sync and what phone do you use?
>>>>>
>>>>> Thanks,
>>>>> Bogo
>>>>>           
>
>