Freebusy Information blended

[Saim Kim]

Gunnar Wrobel schrieb:
>> Hello Gunnar,
>>
>> I read the Freebusy draft from the CVS (rev 1.22). As far as I 
>> understood my problem lies within the group calendar. The freebusy 
>> generation was set to "readers" and therefore the partial freebusy 
>> information of the group calendar was added to the freebusy generation 
>> for every user with read permission set -so almost everybody. I changed 
>> the freebusy generation to "nobody" and when I check under cyradm the 
>> "incidences-for:" tag is set correctly to "nobody". Is there a way to 
>> set this directly?
>>     
>
> You can set these values via Horde. Maybe also via Kontact, I don't
> know if the extended free busy stuff is already implemented there.
>   
Ok, I found the interface under the following URL: 
https://kolab.mydomain.org/fbview. I also checked the settings for the 
freebusy generation
> Or do you refer to the default value that should be changed? Then you
> should probably comment on Bernhards mail concerning the free/busy
> draft. Maybe we should use a different default value and should
> specify this in the draft.
>   
Not quite sure which default value you mean.
>> Unfortunatly, this hasn't solved the problem, yet.
>>     
>
> Meaning the setting had no effect?
>   
Yes, the setting for the "freebusy relevance" did not have an influence 
on the event blending of the other users.
Is there a way to flush the freebusy cache?


Thanks!
Saim
> Cheers,
>
> Gunnar
>
> P.S.: Posting replies above the original discussion makes it hard to
> follow up on the past remarks. It is easier if you write repsonses
> below the text you are replying to. Thanks!
>
>   
>> Best regards,
>> Saim
>>
>>
>>
>>
>>
>> Gunnar Wrobel schrieb:
>>     
>>>> Gunnar Wrobel schrieb:
>>>>     
>>>>         
>>>>> Hi Saim,
>>>>>
>>>>> Saim Kim <s.kim at hia.rwth-aachen.de> writes:
>>>>>
>>>>>   
>>>>>       
>>>>>           
>>>>>> Hello,
>>>>>>
>>>>>> found another strange behavior:
>>>>>>
>>>>>> If one user adds an all day event to his personal calendar and adds 
>>>>>> another person to it, then the freebusy information of all users on the 
>>>>>> server shows that they are supposedly busy even though they are not.
>>>>>>     
>>>>>>         
>>>>>>             
>>>>> Sounds wrong. Please add a bug in the bug tracker. Thanks!
>>>>>
>>>>> Cheers,
>>>>>
>>>>> Gunnar
>>>>>
>>>>>       
>>>>>           
>>> Saim Kim <s.kim at hia.rwth-aachen.de> writes:
>>>
>>>   
>>>       
>>>> Hmm,
>>>>
>>>> maybe the settings of the users are not correct since the personal 
>>>> freebusy list of some users look fine. Where can I check and set which 
>>>> IMAP/calendar folder is used to generate the freebusy list?
>>>>
>>>> Best regards,
>>>> Saim
>>>>
>>>>
>>>>
>>>>
>>>>     
>>>>         
>>> There are a number of settings that may influence which calendars are
>>> taken into account. You best bet are the calendar settings within
>>> horde. There you should have the possibility to influence who may read
>>> which calendar.
>>>
>>> You should probably also check the current free/busy draft that
>>> Bernhard posted recently. It contains detailed information about the
>>> free/busy access system. Comments welcome!
>>>
>>> Cheers,
>>>
>>> Gunnar
>>>
>>>   
>>>       
>>>>>   
>>>>>       
>>>>>           
>>>>>> Saim
>>>>>>
>>>>>> -- 
>>>>>> --------------------------------------------------------------------------
>>>>>> Dipl.-Ing. Saim Kim
>>>>>> Lehrstuhl fuer Medizinische Informationstechnik
>>>>>> Helmholtz-Institut fuer Biomedizinische Technik
>>>>>> RWTH Aachen
>>>>>> Pauwelsstr. 20, D-52074 Aachen
>>>>>> ---
>>>>>> Web:   http://www.medit.hia.rwth-aachen.de/
>>>>>> Tel:   +49-(0)241-80 23218
>>>>>> Fax:   +49-(0)241-80 82442
>>>>>> email: s.kim at hia.rwth-aachen.de
>>>>>> -------------------------------------------------------------------------- 
>>>>>>
>>>>>> _______________________________________________
>>>>>> Kolab-users mailing list
>>>>>> Kolab-users at kolab.org
>>>>>> https://kolab.org/mailman/listinfo/kolab-users
>>>>>>     
>>>>>>         
>>>>>>             
>>>>>   
>>>>>       
>>>>>           
>>>> -- 
>>>> --------------------------------------------------------------------------
>>>> Dipl.-Ing. Saim Kim
>>>> Lehrstuhl fuer Medizinische Informationstechnik
>>>> Helmholtz-Institut fuer Biomedizinische Technik
>>>> RWTH Aachen
>>>> Pauwelsstr. 20, D-52074 Aachen
>>>> ---
>>>> Web:   http://www.medit.hia.rwth-aachen.de/
>>>> Tel:   +49-(0)241-80 23218
>>>> Fax:   +49-(0)241-80 82442
>>>> email: s.kim at hia.rwth-aachen.de
>>>> -------------------------------------------------------------------------- 
>>>>
>>>> _______________________________________________
>>>> Kolab-users mailing list
>>>> Kolab-users at kolab.org
>>>> https://kolab.org/mailman/listinfo/kolab-users
>>>>     
>>>>         
>>>   
>>>       
>> -- 
>> --------------------------------------------------------------------------
>> Dipl.-Ing. Saim Kim
>> Lehrstuhl fuer Medizinische Informationstechnik
>> Helmholtz-Institut fuer Biomedizinische Technik
>> RWTH Aachen
>> Pauwelsstr. 20, D-52074 Aachen
>> ---
>> Web:   http://www.medit.hia.rwth-aachen.de/
>> Tel:   +49-(0)241-80 23218
>> Fax:   +49-(0)241-80 82442
>> email: s.kim at hia.rwth-aachen.de
>> -------------------------------------------------------------------------- 
>>
>> _______________________________________________
>> Kolab-users mailing list
>> Kolab-users at kolab.org
>> https://kolab.org/mailman/listinfo/kolab-users
>>     
>
>   


-- 
--------------------------------------------------------------------------
Dipl.-Ing. Saim Kim
Lehrstuhl fuer Medizinische Informationstechnik
Helmholtz-Institut fuer Biomedizinische Technik
RWTH Aachen
Pauwelsstr. 20, D-52074 Aachen
---
Web:   http://www.medit.hia.rwth-aachen.de/
Tel:   +49-(0)241-80 23218
Fax:   +49-(0)241-80 82442
email: s.kim at hia.rwth-aachen.de
--------------------------------------------------------------------------