[Kolab-devel] Solaris 10 Sparc Kolab V2.2.1 Beta 1SSL/TLS libraries were missing or unusable

ComCept Soliva soliva at comcept.ch
Mon Dec 29 07:19:56 CET 2008


Hi Gunnar

issue open:

https://www.intevation.de/roundup/kolab/msg18180 

new compilation running at the moment..will give feedback as soon as I have
a result/overview.

kind regards

Mail: soliva at comcept.ch 
-----Ursprüngliche Nachricht-----
Von: Gunnar Wrobel [mailto:wrobel at pardus.de] Im Auftrag von
kolab-devel-bounces at kolab.org
Gesendet: Samstag, 27. Dezember 2008 11:55
An: kolab-devel at kolab.org
Betreff: [Kolab-devel] Solaris 10 Sparc Kolab V2.2.1 Beta 1SSL/TLS libraries
were missing or unusable

Quoting ComCept Soliva <soliva at comcept.ch>:

> Hi Gunnar
>
> many thanks to identify the problem. If I run again the compilation it
will
> stop at apache2 compilation and I manipulate the .spec file that within
> apache2 the option zlib will be compiled with_zlib=no. Fine so far but is
> there a possibility to manipulate this in advanced? What would be the best
> choice?

I think it should be possible to set that in install-kolab.sh:

Line 25 -> DEFINE="... -D apache::with_zlib=no"

>
> If there is no possibility is it still the same that If the compilation
> stops --> I manipulation .spec --> start again with install-kolab.sh -->
and
> the compilation will not start from beginn instead it will run at this
point
> it stops? Why I'm asking is because I have to remove on Solaris within
> install-kolab.sh the option "-mindepth 1 -maxdepth 1" (find on Solaris
does
> not support this option)? If I understand the script correct the option
> "-mindepth 1 -maxdepth 1" checks if there is already something within /tmp
> and if so will probably remove the stuff and if so beginn the compilation
at
> scratch?
>
> How should I proceed? What advice you would give me?

Try the hint given above. In addition you should open a bug in the  
issue tracker. I'll assign it to Thomas and we'll see if we can set  
this option by default as long as this problem exists.

Cheers,

Gunnar

>
> Andrea
>
> Mail: soliva at comcept.ch
> -----Ursprüngliche Nachricht-----
> Von: Gunnar Wrobel [mailto:wrobel at pardus.de] Im Auftrag von
> kolab-devel-bounces at kolab.org
> Gesendet: Sonntag, 21. Dezember 2008 23:18
> An: kolab-devel at kolab.org
> Betreff: [Kolab-devel] Solaris 10 Sparc Kolab V2.2.1 Beta 1SSL/TLS
libraries
> were missing or unusable
>
> Quoting ComCept Soliva <soliva at comcept.ch>:
>
>> Hi
>>
>> in RPM/TMP/httpd-2.2.10 there is the config.log.
>>
>> Please find it attached
>
> Thanks, that helped to identify the following conversation:
>
> http://www.mail-archive.com/openpkg-users@openpkg.org/msg03467.html
>
> It might help.
>
> Cheers,
>
> Gunnar
>
>>
>> Andrea
>>
>> Mail: soliva at comcept.ch
>> -----Ursprüngliche Nachricht-----
>> Von: Gunnar Wrobel [mailto:wrobel at pardus.de] Im Auftrag von
>> kolab-devel-bounces at kolab.org
>> Gesendet: Donnerstag, 18. Dezember 2008 23:50
>> An: kolab-devel at kolab.org
>> Betreff: [Kolab-devel] Solaris 10 Sparc Kolab V2.2.1 Beta 1SSL/TLS
> libraries
>> were missing or unusable
>>
>> Quoting ComCept Soliva <soliva at comcept.ch>:
>>
>>> Hi all
>>>
>>> your modifications within the install-kolab.sh script regarding PLATTAG
>>> seems to work fine.
>>>
>>> All positions regarding mindepth/maxdepth I had to remove because
Solaris
>>> does not support mindepth/maxdepth within find ([Kolab-devel]
>> [issue2924]).
>>>
>>> Before I started I verified that there is nothing at all within tmp and
>>> following env variable are in use:
>>>
>>> SunOS dev 5.10 Generic_137111-08 sun4u sparc SUNW,Ultra-4
>>>
>>> # env
>>>
>>> _=/usr/bin/env
>>> LANG=C
>>> HZ=
>>>
>>
>
PATH=/usr/sbin:/usr/bin:/usr/dt/bin:/usr/openwin/bin:/bin:/usr/ucb:/opt/sfw/
>>> bin:/usr/local/bin:/usr/ccs/bin
>>> HISTFILE=/root/.sh_history
>>> LOGNAME=root
>>> MAIL=/var/mail/root
>>> PS1=[root at dev $PWD]#
>>> SHELL=/sbin/sh
>>> HISTSIZE=200
>>> HOME=/root
>>> TERM=vt100
>>> PWD=/kolabtmp
>>> TZ=MET
>>> ENV=/root/.kshrc
>>>
>>> # crle
>>>
>>> Configuration file [version 4]: /var/ld/ld.config
>>>   Default Library Path (ELF):   /lib:/usr/lib:/usr/local/lib
>>>   Trusted Directories (ELF):    /lib/secure:/usr/lib/secure  (system
>>> default)
>>>
>>>
>>> The compilation stopps within apache regarding SSL/TLS:
>>>
>>> checking whether to enable mod_ssl... checking dependencies
>>> checking for SSL/TLS toolkit base... /kolab
>>>   adding "-R/kolab/lib" to LDFLAGS
>>> checking for OpenSSL version... checking openssl/opensslv.h usability...
>> yes
>>> checking openssl/opensslv.h presence... yes
>>> checking for openssl/opensslv.h... yes
>>> checking openssl/ssl.h usability... yes
>>> checking openssl/ssl.h presence... yes
>>> checking for openssl/ssl.h... yes
>>> OK
>>>   forcing SSL_LIBS to "-lssl -lcrypto"
>>> checking openssl/engine.h usability... yes
>>> checking openssl/engine.h presence... yes
>>> checking for openssl/engine.h... yes
>>> checking for SSLeay_version... yes
>>> checking for SSL_CTX_new... no
>>> checking for ENGINE_init... no
>>> checking for ENGINE_load_builtin_engines... no
>>> checking for SSL_set_cert_store... no
>>> configure: error: ... Error, SSL/TLS libraries were missing or unusable
>>> error: Bad exit status from /kolab/RPM/TMP/rpm-tmp.9292 (%build)
>>
>> Is there still a configure.log file available from this step? It
>> should be the unpacked apache source directory.
>>
>> Cheers,
>>
>> Gunnar
>>
>>>
>>>
>>> RPM build errors:
>>>     Bad exit status from /kolab/RPM/TMP/rpm-tmp.9292 (%build)
>>> + exit 1
>>>
>>>
>>>
>>> Full Log File can be downloaeded from following link:
>>>
>>>
> http://www.comcept.ch/kolab2/2.2.1-beta1/kolab-install-Dec-14-08_44_54.zip
>>>
>>> More information about install can be found at:
>>>
>>> http://www.comcept.ch/kolab2/2.2.1-beta1/solaris_10_kolab2_install.txt
>>>
>>>
>>>
>>> OpenSSL was compiled and installed successful:
>>>
>>>
>>> Processing files: openssl-0.9.8g-20080101
>>> Wrote:
/kolab/RPM/PKG/openssl-0.9.8g-20080101.sparc64-solaris10-kolab.rpm
>>> Executing(%clean): env -i /kolab/lib/openpkg/bash --norc --noprofile
>> --posix
>>> -e /kolab/RPM/TMP/rpm-tmp.699
>>> + cd /kolab/RPM/TMP
>>> + cd openssl-0.9.8g
>>> + rm -rf /kolab/RPM/TMP/openssl-0.9.8g-root
>>> + exit 0
>>> Executing(--clean): env -i /kolab/lib/openpkg/bash --norc --noprofile
>>> --posix -e /kolab/RPM/TMP/rpm-tmp.17537
>>> + cd /kolab/RPM/TMP
>>> + rm -rf openssl-0.9.8g
>>> + exit 0
>>> Preparing...
>>> ##################################################
>>> openssl
>>> ##################################################
>>> :::: /tmp/install-kolab....27392/openssl-0.9.8g-20080101.src.rpm = 0
::::
>>>
>>> The library is also there:
>>>
>>> # ls -la /kolab/lib/libssl*
>>> -rw-r--r--   1 kolab    kolab     403268 Dec 14 18:00
/kolab/lib/libssl.a
>>>
>>>
>>>
>>> Within the include dir openssl dir exists:
>>>
>>> # ls -la /kolab/include/openssl
>>> total 1264
>>> drwxr-xr-x   2 kolab    kolab         70 Dec 14 18:02 .
>>> drwxr-xr-x  14 kolab    kolab         41 Dec 14 21:39 ..
>>> -rw-r--r--   1 kolab    kolab       5372 Dec 14 17:59 aes.h
>>> -rw-r--r--   1 kolab    kolab      46728 Dec 14 17:59 asn1.h
>>> -rw-r--r--   1 kolab    kolab      18956 Dec 14 17:59 asn1_mac.h
>>> -rw-r--r--   1 kolab    kolab      27838 Dec 14 17:59 asn1t.h
>>> -rw-r--r--   1 kolab    kolab      30772 Dec 14 17:59 bio.h
>>> -rw-r--r--   1 kolab    kolab       5073 Dec 14 17:59 blowfish.h
>>> -rw-r--r--   1 kolab    kolab      33035 Dec 14 17:59 bn.h
>>> -rw-r--r--   1 kolab    kolab       4565 Dec 14 17:59 buffer.h
>>> -rw-r--r--   1 kolab    kolab       4349 Dec 14 17:59 cast.h
>>> -rw-r--r--   1 kolab    kolab       1601 Dec 14 17:59 comp.h
>>> -rw-r--r--   1 kolab    kolab       9484 Dec 14 17:59 conf.h
>>> -rw-r--r--   1 kolab    kolab       4080 Dec 14 17:59 conf_api.h
>>> -rw-r--r--   1 kolab    kolab      22121 Dec 14 17:59 crypto.h
>>> -rw-r--r--   1 kolab    kolab      10724 Dec 14 17:59 des.h
>>> -rw-r--r--   1 kolab    kolab      18226 Dec 14 17:59 des_old.h
>>> -rw-r--r--   1 kolab    kolab       8372 Dec 14 17:59 dh.h
>>> -rw-r--r--   1 kolab    kolab      10474 Dec 14 17:59 dsa.h
>>> -rw-r--r--   1 kolab    kolab      16252 Dec 14 17:59 dso.h
>>> -rw-r--r--   1 kolab    kolab       6146 Dec 14 17:59 dtls1.h
>>> -rw-r--r--   1 kolab    kolab       9632 Dec 14 17:59 e_os2.h
>>> -rw-r--r--   1 kolab    kolab        540 Dec 14 17:59 ebcdic.h
>>> -rw-r--r--   1 kolab    kolab      21389 Dec 14 17:59 ec.h
>>> -rw-r--r--   1 kolab    kolab       4609 Dec 14 17:59 ecdh.h
>>> -rw-r--r--   1 kolab    kolab      10578 Dec 14 17:59 ecdsa.h
>>> -rw-r--r--   1 kolab    kolab      37839 Dec 14 17:59 engine.h
>>> -rw-r--r--   1 kolab    kolab      12493 Dec 14 17:59 err.h
>>> -rw-r--r--   1 kolab    kolab      35620 Dec 14 17:59 evp.h
>>> -rw-r--r--   1 kolab    kolab       4368 Dec 14 17:59 hmac.h
>>> -rw-r--r--   1 kolab    kolab       7642 Dec 14 17:59 krb5_asn.h
>>> -rw-r--r--   1 kolab    kolab       5927 Dec 14 17:59 kssl.h
>>> -rw-r--r--   1 kolab    kolab       7429 Dec 14 17:59 lhash.h
>>> -rw-r--r--   1 kolab    kolab       3897 Dec 14 17:59 md2.h
>>> -rw-r--r--   1 kolab    kolab       4661 Dec 14 17:59 md4.h
>>> -rw-r--r--   1 kolab    kolab       4661 Dec 14 17:59 md5.h
>>> -rw-r--r--   1 kolab    kolab     113729 Dec 14 17:59 obj_mac.h
>>> -rw-r--r--   1 kolab    kolab      33396 Dec 14 17:59 objects.h
>>> -rw-r--r--   1 kolab    kolab      23795 Dec 14 17:59 ocsp.h
>>> -rw-r--r--   1 kolab    kolab       6533 Dec 14 17:59 opensslconf.h
>>> -rw-r--r--   1 kolab    kolab       3751 Dec 14 17:59 opensslv.h
>>> -rw-r--r--   1 kolab    kolab       6446 Dec 14 17:59 ossl_typ.h
>>> -rw-r--r--   1 kolab    kolab      27927 Dec 14 17:59 pem.h
>>> -rw-r--r--   1 kolab    kolab       2863 Dec 14 17:59 pem2.h
>>> -rw-r--r--   1 kolab    kolab      12677 Dec 14 17:59 pkcs12.h
>>> -rw-r--r--   1 kolab    kolab      16333 Dec 14 17:59 pkcs7.h
>>> -rw-r--r--   1 kolab    kolab       6150 Dec 14 17:59 pq_compat.h
>>> -rw-r--r--   1 kolab    kolab       3519 Dec 14 17:59 pqueue.h
>>> -rw-r--r--   1 kolab    kolab       5251 Dec 14 17:59 rand.h
>>> -rw-r--r--   1 kolab    kolab       4294 Dec 14 17:59 rc2.h
>>> -rw-r--r--   1 kolab    kolab       3707 Dec 14 17:59 rc4.h
>>> -rw-r--r--   1 kolab    kolab       4284 Dec 14 17:59 ripemd.h
>>> -rw-r--r--   1 kolab    kolab      18202 Dec 14 17:59 rsa.h
>>> -rw-r--r--   1 kolab    kolab     126893 Dec 14 17:59 safestack.h
>>> -rw-r--r--   1 kolab    kolab       7329 Dec 14 17:59 sha.h
>>> -rw-r--r--   1 kolab    kolab      82501 Dec 14 17:59 ssl.h
>>> -rw-r--r--   1 kolab    kolab      10716 Dec 14 17:59 ssl2.h
>>> -rw-r--r--   1 kolab    kolab       3744 Dec 14 17:59 ssl23.h
>>> -rw-r--r--   1 kolab    kolab      22283 Dec 14 17:59 ssl3.h
>>> -rw-r--r--   1 kolab    kolab       4418 Dec 14 17:59 stack.h
>>> -rw-r--r--   1 kolab    kolab      26481 Dec 14 17:59 store.h
>>> -rw-r--r--   1 kolab    kolab      19456 Dec 14 17:59 symhacks.h
>>> -rw-r--r--   1 kolab    kolab      18121 Dec 14 17:59 tls1.h
>>> -rw-r--r--   1 kolab    kolab       4117 Dec 14 17:59 tmdiff.h
>>> -rw-r--r--   1 kolab    kolab       4300 Dec 14 17:59 txt_db.h
>>> -rw-r--r--   1 kolab    kolab      16418 Dec 14 17:59 ui.h
>>> -rw-r--r--   1 kolab    kolab       3439 Dec 14 17:59 ui_compat.h
>>> -rw-r--r--   1 kolab    kolab      47946 Dec 14 17:59 x509.h
>>> -rw-r--r--   1 kolab    kolab      20782 Dec 14 17:59 x509_vfy.h
>>> -rw-r--r--   1 kolab    kolab      29980 Dec 14 17:59 x509v3.h
>>>
>>>
>>> What is going wrong here....? How to proceed.....? If you need more
>>> information please tell me.
>>>
>>> kinde regards
>>>
>>> Andrea Soliva
>>>
>>> Mail: soliva at comcept.ch
>>>
>>> _______________________________________________
>>> Kolab-devel mailing list
>>> Kolab-devel at kolab.org
>>> https://kolab.org/mailman/listinfo/kolab-devel
>>>
>>
>>
>>
>> --
>> ______ http://kdab.com _______________ http://kolab-konsortium.com _
>>
>> p at rdus Kolab work is funded in part by KDAB and the Kolab Konsortium
>>
>> ____ http://www.pardus.de _________________ http://gunnarwrobel.de _
>> E-mail : p at rdus.de                                 Dr. Gunnar Wrobel
>> Tel.   : +49 700 6245 0000                          Bundesstrasse 29
>> Fax    : +49 721 1513 52322                          D-20146 Hamburg
>> --------------------------------------------------------------------
>>     >> Mail at ease - Rent a kolab groupware server at p at rdus <<
>> --------------------------------------------------------------------
>>
>>
>> ----------------------------------------------------------------
>> This message was sent using IMP, the Internet Messaging Program.
>>
>
>
>
> --
> ______ http://kdab.com _______________ http://kolab-konsortium.com _
>
> p at rdus Kolab work is funded in part by KDAB and the Kolab Konsortium
>
> ____ http://www.pardus.de _________________ http://gunnarwrobel.de _
> E-mail : p at rdus.de                                 Dr. Gunnar Wrobel
> Tel.   : +49 700 6245 0000                          Bundesstrasse 29
> Fax    : +49 721 1513 52322                          D-20146 Hamburg
> --------------------------------------------------------------------
>     >> Mail at ease - Rent a kolab groupware server at p at rdus <<
> --------------------------------------------------------------------
>
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
>
> _______________________________________________
> Kolab-devel mailing list
> Kolab-devel at kolab.org
> https://kolab.org/mailman/listinfo/kolab-devel
>



-- 
______ http://kdab.com _______________ http://kolab-konsortium.com _

p at rdus Kolab work is funded in part by KDAB and the Kolab Konsortium

____ http://www.pardus.de _________________ http://gunnarwrobel.de _
E-mail : p at rdus.de                                 Dr. Gunnar Wrobel
Tel.   : +49 700 6245 0000                          Bundesstrasse 29
Fax    : +49 721 1513 52322                          D-20146 Hamburg
--------------------------------------------------------------------
    >> Mail at ease - Rent a kolab groupware server at p at rdus <<
--------------------------------------------------------------------


----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.




More information about the devel mailing list