[Kolab-devel] [Partial SUMMARY] Installation of Kolab2 2.1.0Final on Solaris 10 11/06 Sparc

Gunnar Wrobel wrobel at pardus.de
Wed May 30 10:04:26 CEST 2007 

Hi Andrea,

"ComCept Net GmbH Andrea Soliva" <soliva at comcept.ch> writes:

> Hi all
>
> I was able to successful compile kolab2 Final V 2.1.0:
>
> --> I have 100% confirmation that something with the db4 check of php is not
> working fine or the successful compiled and installed db4 is not ok because
> of following:
>
> I compiled db4 V 4.1.25 in a separeted dir on the same system as following:
>
>
> 	# mkdir /root/db
> 	# cd /root/db
> 	# mv /export/sysop/db-4.1.25.NC.tar.gz /root/db/
> 	# gzip -dc db-4.1.25.NC.tar.gz | tar xvf -
> 	# cd db-4.1.25.NC
> 	# cd dist
>
> 	# env CC=gcc ../dist/configure \
> 	--prefix=/opt/db-4.1.25 \
> 	--exec-prefix=/opt/db-4.1.25 \
> 	--enable-compat185 \
> 	--enable-shared=yes \
> 	--enable-static=yes \
> 	--enable-fast-install=yes
>
> 	# make
>
> 	# make install
>
> After that I run kolab2 install process and had following result:
>
>
> INSTALL: openpkg-2.5.4-2.5.4 make-3.80-2.5.0 binutils-2.16.1-2.5.1
> gcc-4.0.2-2.5.0 fsl-1.7.0-2.20070303 mm-1.4.0-2.5.0 perl-5.8.7-2.5.1
> perl-openpkg-5.8.7-2.5.0 perl-conv-5.8.7-2.5.0 lzo-2.01-2.5.0
> readline-5.0.5-2.5.0 sharutils-4.5.1-2.5.0 ncurses-5.5.20051015-2.5.0
> bzip2-1.0.3-2.5.0 pcre-6.4-2.5.0 grep-2.5.1a-2.5.0 texinfo-4.8-2.5.1
> diffutils-2.8.7-2.5.0 gzip-1.3.5-2.5.1 zlib-1.2.3-2.5.0 expat-1.95.8-2.5.0
> perl-term-5.8.7-2.5.0 perl-ds-5.8.7-2.5.0 perl-stats-5.8.7-2.5.0
> perl-time-5.8.7-2.5.0 perl-util-5.8.7-2.5.0 perl-parse-5.8.7-2.5.0
> perl-sys-5.8.7-2.5.0 openssl-0.9.8a-2.5.4 perl-mail-5.8.7-2.5.0
> perl-crypto-5.8.7-2.5.0 perl-xml-5.8.7-2.5.0 perl-net-5.8.7-2.5.0
> perl-comp-5.8.7-2.5.0 perl-ssl-5.8.7-2.5.0 perl-www-5.8.7-2.5.1
> perl-dns-5.8.7-2.5.0 imap-2004g-2.5.0_kolab procmail-3.22-2.5.0
> db-4.3.29.0-2.5.0 openldap-2.3.29-2.20061110_kolab m4-1.4.3-2.5.0
> bison-2.1-2.5.0 flex-2.5.31-2.5.0 groff-1.19.2-2.5.0 sasl-2.1.21-2.5.0
> getopt-20051005-2.5.0 proftpd-1.3.0rc2-2.5.0 postfix-2.2.5-2.5.0_kolab
> perl-ldap-5.8.7-2.5.0 perl-db-5.8.7-2.5.1 config-20051002-2.5.0
> imapd-2.2.12-2.5.0_kolab2 libiconv-1.10-2.5.0 autoconf-2.59-2.5.0
> automake-1.9.6-2.5.0 gettext-0.14.5-2.5.0 file-4.15-2.5.0_kolab2
> openpkg-tools-0.8.47-2.5.0 patch-2.5.9-2.5.0 sed-4.1.4-2.5.0
> libxml-2.6.22-2.5.0 libxslt-1.1.15-2.5.1 gmp-4.1.4-2.5.0
> spamassassin-3.1.0-2.5.1_kolab amavisd-2.3.3-2.5.0_kolab curl-7.15.0-2.5.2
> bc-1.06-2.5.0 pkgconfig-0.19-2.5.0 clamav-0.90.2-20070413_kolab
> perl-kolab-5.8.7-20070420 kolabd-2.1.0-20070510
> kolab-webadmin-2.1.0-20070510
> MISSSRC: none
> MISSPKG: apache-1.3.33-2.5.6_kolab2 php-4.4.0-2.5.2_kolab2
> php-smarty-2.6.10-20051003 kolab-horde-framework-2.1.0-20070420
> kolab-resource-handlers-2.1.0-20070510 kolab-horde-fbview-2.1.0-20070420
> MISSING: apache-1.3.33-2.5.6_kolab2 php-4.4.0-2.5.2_kolab2
> php-smarty-2.6.10-20051003 kolab-horde-framework-2.1.0-20070420
> kolab-resource-handlers-2.1.0-20070510 kolab-horde-fbview-2.1.0-20070420
> SURPLUS: none
> SUMMARY: NODE=dev; CMD=kolab; DATE=2007-05-18/23:50:58; HASX11=; DONE
>
>
> After that I replaced the libdb and db.h from /kolab witht the files from
> the seperated compiled 4.1.2 version meaing:
>
>
>  cp  /opt/db-4.1.25/include/db.h /opt/kolab/include/db.h
>  cp  /opt/db-4.1.25/lib/libdb.a /opt/kolab/lib/libdb.a
>
> After that I controlled rights of the files in this way that it reflects the
> existing old ones. Now I started kolab2 installation process again meaning
> proceeded witht the failed one and the result is now:
>
> INSTALL: openpkg-2.5.4-2.5.4 make-3.80-2.5.0 binutils-2.16.1-2.5.1
> gcc-4.0.2-2.5.0 fsl-1.7.0-2.20070303 mm-1.4.0-2.5.0 perl-5.8.7-2.5.1
> perl-openpkg-5.8.7-2.5.0 perl-conv-5.8.7-2.5.0 lzo-2.01-2.5.0
> readline-5.0.5-2.5.0 sharutils-4.5.1-2.5.0 ncurses-5.5.20051015-2.5.0
> bzip2-1.0.3-2.5.0 pcre-6.4-2.5.0 grep-2.5.1a-2.5.0 texinfo-4.8-2.5.1
> diffutils-2.8.7-2.5.0 gzip-1.3.5-2.5.1 zlib-1.2.3-2.5.0 expat-1.95.8-2.5.0
> perl-term-5.8.7-2.5.0 perl-ds-5.8.7-2.5.0 perl-stats-5.8.7-2.5.0
> perl-time-5.8.7-2.5.0 perl-util-5.8.7-2.5.0 perl-parse-5.8.7-2.5.0
> perl-sys-5.8.7-2.5.0 openssl-0.9.8a-2.5.4 perl-mail-5.8.7-2.5.0
> perl-crypto-5.8.7-2.5.0 perl-xml-5.8.7-2.5.0 perl-net-5.8.7-2.5.0
> perl-comp-5.8.7-2.5.0 perl-ssl-5.8.7-2.5.0 perl-www-5.8.7-2.5.1
> perl-dns-5.8.7-2.5.0 imap-2004g-2.5.0_kolab procmail-3.22-2.5.0
> db-4.3.29.0-2.5.0 openldap-2.3.29-2.20061110_kolab m4-1.4.3-2.5.0
> bison-2.1-2.5.0 flex-2.5.31-2.5.0 groff-1.19.2-2.5.0 sasl-2.1.21-2.5.0
> getopt-20051005-2.5.0 proftpd-1.3.0rc2-2.5.0 postfix-2.2.5-2.5.0_kolab
> perl-ldap-5.8.7-2.5.0 perl-db-5.8.7-2.5.1 config-20051002-2.5.0
> imapd-2.2.12-2.5.0_kolab2 libiconv-1.10-2.5.0 autoconf-2.59-2.5.0
> automake-1.9.6-2.5.0 gettext-0.14.5-2.5.0 file-4.15-2.5.0_kolab2
> openpkg-tools-0.8.47-2.5.0 patch-2.5.9-2.5.0 sed-4.1.4-2.5.0
> libxml-2.6.22-2.5.0 libxslt-1.1.15-2.5.1 apache-1.3.33-2.5.6_kolab2
> php-4.4.0-2.5.2_kolab2 php-smarty-2.6.10-20051003 gmp-4.1.4-2.5.0
> spamassassin-3.1.0-2.5.1_kolab amavisd-2.3.3-2.5.0_kolab curl-7.15.0-2.5.2
> bc-1.06-2.5.0 pkgconfig-0.19-2.5.0 clamav-0.90.2-20070413_kolab
> perl-kolab-5.8.7-20070420 kolabd-2.1.0-20070510
> kolab-webadmin-2.1.0-20070510 kolab-horde-framework-2.1.0-20070420
> kolab-resource-handlers-2.1.0-20070510 kolab-horde-fbview-2.1.0-20070420
> MISSSRC: none
> MISSPKG: none
> MISSING: none
> SURPLUS: none
> SUMMARY: NODE=dev; CMD=kolab; DATE=2007-05-24/12:09:25; HASX11=; DONE
>
> You see all successful. This is the confirmation that something is wrong
> witht the successful compiled db or something is wrong with the php4 check.
> I will now proceed with the installation and look how the system is
> reacting. I will copy the original libdb.a and db.h again to the original
> place and proceed with bootstrap etc. if this fails I will link to my db and
> look what happens. 
>
> Keep you up to date.....

would be great if that would find its way into the wiki in the end so
that other solaris users are able to follow your procedures :)

Cheers,

Gunnar

-- 
____ http://www.pardus.de _________________ http://gunnarwrobel.de _

    >> Mail at ease - Rent a kolab groupware server at p at rdus <<

p at rdus Kolab work is funded in part by KDAB and the Kolab Konsortium

More information about the devel mailing list