[Kolab-devel] yet another way to build kolab

[Richard Bos]

Op dinsdag 8 juni 2004 23:18, schreef Richard Bos:
> Of course the spec file should become part of the autotools machinery, by
> doing so the version of the tarball and the spec file are _always_ in sync.
>   As the spec file now becomes intregrated into to the tarball one can
> obtain the rpm by: rpmbuild -ta tarball.tar.gz
>
> With the suggestion above, I think that the rpm in the top kolab-webadmin
> directory can just be removed.  All you need now is:
> ./bootstrap, ./configure --prefix=/kolab, make, make distcheck and rpmbuild
> -ba kolab-webadmin...tar.gz(bz2).

I'll have a look at it. I'll copy the spec from the top level to 1 below where 
the autotools files resides.  However, I'm not able to access cvs, is the 
server down (I could access the server till about 2100 hours yesterday, but 
since than the server seems down)?

:~/cvs/kolab> cvs up
cvs [update aborted]: connect to intevation.de(131.173.30.110):2401 failed: 
Connection refused

:~/cvs/kolab> ping 131.173.30.110
PING 131.173.30.110 (131.173.30.110) 56(84) bytes of data.
64 bytes from 131.173.30.110: icmp_seq=1 ttl=237 time=40.2 ms
64 bytes from 131.173.30.110: icmp_seq=2 ttl=237 time=39.0 ms

-- 
Richard Bos
Without a home the journey is endless