kolab with ldaps (port 636) ?

JOYDEEP j.bakshi at unlimitedmail.org
Tue Mar 13 09:15:27 CET 2007


Gunnar Wrobel wrote:
> JOYDEEP <j.bakshi at unlimitedmail.org> writes:
>
>   
>>> And netstat shows the open port:
>>>
>>> netstat -lnp | grep 636
>>> tcp        0      0 0.0.0.0:636             0.0.0.0:*               LISTEN      22102/slapd       
>>>
>>>       
>> Thanks, I also have port 636 open here. but can I use kolab to listen
>> 636 ?  
>>     
>
> If you have port 636 open and it is listed in the netstat output, then
> Kolab is indeed listening on that port. Nothing additional is required.
>
>   
>>> So your probably configured something in your client in an incorrect
>>> way.
>>>
>>>       
>> more over kaddressbook is not working with 636 but with 389.
>>     
>
> As I mentioned this is probably a configuration problem with your
> client. Try checking with another client first. Use luma for
> example. You can also go into debugging mode with you LDAP server and
> check what happens on the server side (see
> http://wiki.kolab.org/index.php/Kolab2_Server_Troubleshooting_-_LDAP).
>   
Thanks for the link
> Cheers,
>
> Gunnar
>
>   




More information about the users mailing list