Recompile/Rebuilding Apache and PHP with MySQL support.

Roy Hoobler roy at connectcomputing.com
Sun Nov 6 02:24:12 CET 2005


Hi,
I got most of this working but cannot get php to recompile.

I tried to add it to an install but PHP wouldn't recompile. so...

I added everything to an original install (and it seemed to work).  However 
the php at the @trigger command.  I went back and changed it to @forcere but 
not have a quasi error saying it is a SURPLUS. (close to the same problem)

I have a test page that calls phpInfo to see.

Any ideas?

Thanks,

Roy


On Friday 21 October 2005 12:08 pm, Fabio Pietrosanti wrote:
> My configuration include also mysql along with gdlib and other packages.
>
> *cd /kolab/RPM/SRC*
>
> Download all needed packages:
> *wget -b **ftp://ftp.openpkg.org/release/2.4/SRC/jpeg-6b-2.4.0.src.rpm*
>
> *wget -b **ftp://ftp.openpkg.org/release/2.4/SRC/png-1.2.8-2.4.0.src.rpm*
>
> *wget -b
> **ftp://ftp.openpkg.org/release/2.4/SRC/freetype-2.1.9-2.4.0.src.rpm*
>
> *wget -b **ftp://ftp.openpkg.org/release/2.4/SRC/gd-2.0.33-2.4.0.src.rpm*
>
> *wget -b **ftp://ftp.openpkg.org/release/2.4/SRC/gnupg-1.4.1-2.4.0.src.rpm*
>
> *wget -b
> **ftp://ftp.openpkg.org/release/2.4/SRC/PLUS/libmcrypt-2.5.7-2.4.0.src.rpm*
>
> *wget -b
> **ftp://ftp.openpkg.org/release/2.4/SRC/PLUS/mhash-0.9.2-2.4.0.src.rpm*
>
> *wget -b
> **ftp://ftp.openpkg.org/release/2.4/SRC/PLUS/tcpwrappers-7.6k-2.4.0.src.rpm
>*
>
> *wget -b
> **ftp://ftp.openpkg.org/release/2.4/SRC/PLUS/syslog-ng-1.6.8-2.4.0.src.rpm*
>
> *wget -b
> **ftp://ftp.openpkg.org/release/2.4/SRC/snmp-5.2.1-2.4.0.src.rpm *
> <ftp://ftp.openpkg.org/release/2.4/SRC/snmp-5.2.1-2.4.0.src.rpm>
>
> *wget -b
> **ftp://ftp.openpkg.org/release/2.4/SRC/PLUS/snmpdx-0.2.10-2.4.0.src.rpm*
>
> *wget -b
> **ftp://ftp.openpkg.org/release/2.4/SRC/PLUS/mrtg-2.12.1-2.4.0.src.rpm*
>
> *wget -b
> **ftp://ftp.openpkg.org/release/2.4/SRC/rrdtool-1.2.10-2.4.0.src.rpm*
>
> *wget -b
> **ftp://ftp.openpkg.org/release/2.4/SRC/coreutils-5.2.1-2.4.0.src.rpm*
>
> *wget -b
> **ftp://ftp.openpkg.org/release/2.4/SRC/openssh-4.1p1-2.4.0.src.rpm*
>
> *wget -b
> **ftp://ftp.openpkg.org/release/2.4/SRC/traceroute-1.4a12-2.4.0.src.rpm*
>
> *wget -b
> **ftp://ftp.openpkg.org/release/2.4/SRC/mysql-4.1.12-2.4.0.src.rpm*
>
> *wget -b
> **ftp://ftp.openpkg.org/release/2.4/SRC/PLUS/mhonarc-2.6.12-2.4.0.src.rp*m
> <ftp://ftp.openpkg.org/release/2.4/SRC/PLUS/mhonarc-2.6.12-2.4.0.src.rpm>
>
> *wget -b
> **ftp://ftp.openpkg.org/current/SRC/nagios-1.2-20050919.src.rpm*
> <ftp://ftp.openpkg.org/current/SRC/nagios-1.2-20050802.src.rpm>
>
> *wget -b
> **ftp://ftp.openpkg.org/current/SRC/inetutils-1.4.2-20050910.src.rpm*
> <ftp://ftp.openpkg.org/current/SRC/inetutils-1.4.2-20041129.src.rpm>
>
> *wget -b
> **ftp://ftp.openpkg.org/current/SRC/fping-2.4b2to-20041011.src.rpm*
>
> *wget -b
> **ftp://ftp.openpkg.org/release/2.4/SRC/pkgconfig-0.17.2-2.4.0.src.rpm*
>
> *wget -b
> **ftp://ftp.openpkg.org/release/2.4/SRC/libart-2.3.16-2.4.0.src.rpm*
>
> *wget -b
> ftp://ftp.openpkg.org/release/2.4/SRC/PLUS/imaputils-2002-2.4.0.src.rpm*
>
> *wget -b
> ftp://ftp.openpkg.org/release/2.4/SRC/PLUS/openvpn-2.0-2.4.0.src.rpm*
>
> *wget -b
> ftp://ftp.openpkg.org/release/2.4/SRC/libtool-1.5.18-2.4.0.src.rpm*
>
>
> Create the new obmtool config files with packages that need to be
> installed: *cp obmtool.conf obmtool-custom.conf*
>
> *vim obmtool-custom.conf*
>
>
>     *
>
>       remove all kolab packages definitions ( @install )
>
>     *
>
>       change loc definition to ./
>
>           o
>
>             *loc='./'*
>
>     * add to obmtool.conf
>
>
> *@install ${loc}jpeg-6b-2.4.0*
>
> *@install ${loc}png-1.2.8-2.4.0*
>
> *@install ${loc}freetype-2.1.9-2.4.0*
>
> *@install ${loc}gd-2.0.33-2.4.0*
>
> *@install ${loc}gnupg-1.4.1-2.4.0*
>
> *@install ${loc}libmcrypt-2.5.7-2.4.0*
>
> *@install ${loc}mhash-0.9.2-2.4.0*
>
> *@install ${loc}tcpwrappers-7.6k-2.4.0*
>
> *@install ${loc}snmp-5.2.1-2.4.0*
>
> *@install ${loc}snmpdx-0.2.10-2.4.0*
>
> *@install ${loc}mrtg-2.12.1-2.4.0*
>
> *@install ${loc}pkgconfig-0.17.2-2.4.0*
>
> *@install ${loc}libart-2.3.16-2.4.0*
>
> *@install ${loc}rrdtool-1.2.10-2.4.0*
>
> *@install ${loc}coreutils-5.2.1-2.4.0*
>
> *@install ${loc}openssh-4.1p1-2.4.0*
>
> *@install ${loc}traceroute-1.4a12-2.4.0*
>
> *@install ${loc}mysql-4.1.12-2.4.0*
>
> *@install ${loc}fping-2.4b2to-20041011*
>
> *@install ${loc}nagios-1.2-20050919.src.rpm
> <ftp://ftp.openpkg.org/current/SRC/nagios-1.2-20050802.src.rpm>*
>
> *@install ${loc}inetutils-1.4.2-20050910*
>
> *@install ${loc}syslog-ng-1.6.8-2.4.0*
>
> *@install ${loc}imaputils-2002-2.4.0*
>
> *@install ${loc}mhonarc-2.6.12-2.4.0*
>
> *@install ${loc}openvpn-2.0-2.4.0*
>
> *@install ${loc}libtool-1.5.18-2.4.0*
>
>     *
>
>       Remove and force recompilation of apache with the following
>       modules: mysql, bzip2, freetype, gd, mcrypt, mhash, snmp
>
> @wiperpm ${altloc}apache-1.3.33-2.4.1_kolab
>
> *@forcein ${altloc}apache-1.3.33-2.4.1_kolab \*
>
> *--with=mod_auth_ldap --with=mod_dav \*
>
> *--with=mod_php --with=mod_php_zlib \*
>
> *--with=mod_php_gdbm --with=mod_php_gettext \*
>
> *--with=mod_php_imap --with=mod_php_openldap \*
>
> *--with=mod_php_xml --with=mod_php_dom \*
>
> *--with=mod_ssl --with=mod_php_mbstring \*
>
> */--with=mod_php_mysql --with=mod_php_bzip2 \/*
>
> /*--with=mod_php_freetype --with=mod_php_gd \*/
>
> /*--with=mod_php_mcrypt --with=mod_php_mhash \*/
>
> /*--with=mod_php_snmp*/
>
> /*@wiperpm ${altloc}php-4.3.11-2.4.0_kolab*/
>
> *@forcein ${altloc}php-4.3.11-2.4.0_kolab \*
>
> *--with=zlib --with=gdbm \*
>
> *--with=gettext --with=imap \*
>
> *--with=openldap --with=pear \*
>
> *--with=xml --with=dom \*
>
> *--with=ssl --with=mbstring \*
>
> /*--with=mcrypt --with=mysql \*/
>
> /*--with=mbzip2 --with=gd \*/
>
> /*--with=snmp*/
>
>
>     *
>
>       Now start the packages compilation
>
> *./obmtool -c obmtool-conf.conf kolab*
>
>
> This was a cut&paste from the installation document i'm writing that
> will be released after the infrastructure on which i'm working will go
> in production.
>
> Fabio
>
> Yomiit ha scritto:
> > Hi All,
> >
> > I have being able to successfully installed Kolab2 and everything works
> > ok. I am trying to setup Horde as described on Kolab website, but do not
> > know how to go about recompiling Apache and PHP with MySQL support
> > without having to rebuild Kolab.
> >
> > I would appreciate if I can get pointers on how to achieve this.
> >
> > Many Thanks
> >
> > --
> > Yomiit
> >
> > _______________________________________________
> > Kolab-users mailing list
> > Kolab-users at kolab.org
> > https://kolab.org/mailman/listinfo/kolab-users

-- 
Roy Hoobler
Connect Computing Inc
IT Consulting for Business
http://www.connectcomputing.com
(973)759-5375




More information about the users mailing list