Installation_Guide/en-US
Jeroen van Meeuwen
vanmeeuwen at kolabsys.com
Wed Feb 29 18:26:10 CET 2012
Installation_Guide/en-US/Kolab_Server_Installation.xml | 1049 ----------
Installation_Guide/en-US/sect-Repository_Configuration-Installation_with_APT_Packages.xml | 481 ++++
Installation_Guide/en-US/sect-Repository_Configuration-Installation_with_RPM_Packages.xml | 574 +++++
3 files changed, 1059 insertions(+), 1045 deletions(-)
New commits:
commit 34bc33d3f0d5d56a12dde76b348643f4b24ccb8d
Author: Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen at kolabsys.com>
Date: Wed Feb 29 17:25:48 2012 +0000
Split out the two lengthy sections on APT/RPM packaging
diff --git a/Installation_Guide/en-US/Kolab_Server_Installation.xml b/Installation_Guide/en-US/Kolab_Server_Installation.xml
index 2adc303..628a491 100755
--- a/Installation_Guide/en-US/Kolab_Server_Installation.xml
+++ b/Installation_Guide/en-US/Kolab_Server_Installation.xml
@@ -6,7 +6,7 @@
<chapter id="chap-Community_Installation_Guide-Installation">
<title>Installation</title>
<para>
- The Kolab community provides APT and RPM packages for most commonly used Linux distributions. Please see <xref linkend="sect-Community_Installation_Guide-Repository_Configuration-Installation_with_APT_Packages" /> and <xref linkend="sect-Community_Installation_Guide-Repository_Configuration-Installation_with_RPM_Packages" /> for more information.
+ The Kolab community provides APT and RPM packages for most commonly used Linux distributions. Please see <xref linkend="sect-Community_Installation_Guide-Installation_with_APT_Packages" /> and <xref linkend="sect-Community_Installation_Guide-Installation_with_RPM_Packages" /> for more information.
</para>
<section id="sect-Community_Installation_Guide-Installation-Kolab_Server_Installation">
<title>Kolab Server Installation</title>
@@ -20,7 +20,7 @@
The default installation assumes that all components are installed on the same machine.
</para>
<para>
- If you have a distributed deployment or want non default components, please see <xref linkend="sect-Community_Installation_Guide-Repository_Configuration-Installation_with_APT_Packages" /> and <xref linkend="sect-Community_Installation_Guide-Repository_Configuration-Installation_with_RPM_Packages" /> for more information.
+ If you have a distributed deployment or want non default components, please see <xref linkend="sect-Community_Installation_Guide-Installation_with_APT_Packages" /> and <xref linkend="sect-Community_Installation_Guide-Installation_with_RPM_Packages" /> for more information.
</para>
<para>
For help with your deployment please refer to the “Deployment Guideâ€.
@@ -33,1049 +33,8 @@
<para>
Kolab provides packages in extra repositories, therefore these repositories need to be configured first.
</para>
- <section id="sect-Community_Installation_Guide-Repository_Configuration-Installation_with_APT_Packages">
- <title>Installation with APT Packages</title>
- <para>
- APT packages are provided for the following GNU/Linux distributions, and distribution versions:
- </para>
- <para>
- <table frame="all" id="tabl-Community_Installation_Guide-Installation_with_APT_Packages-APT_Packages_Distribution_Support">
- <title>APT Packages Distribution Support</title>
- <tgroup align="left" cols="5" colsep="1" rowsep="1">
- <colspec colname="c1"></colspec>
- <colspec colname="c2"></colspec>
- <colspec colname="c3"></colspec>
- <colspec colname="c4"></colspec>
- <colspec colname="c5" colnum="5"></colspec>
- <thead>
- <row>
- <entry align="center" nameend="c4" namest="c1">
- Distribution Information
- </entry>
- <entry morerows="1">
- EOS / EOL Date
- </entry>
-
- </row>
- <row>
- <entry>
- Name
- </entry>
- <entry>
- CodeName
- </entry>
- <entry>
- Version
- </entry>
- <entry>
- Architectures
- </entry>
-
- </row>
-
- </thead>
- <!--
- <tfoot> <row>
- <entry>
- f1
- </entry>
- <entry>
- f2
- </entry>
- <entry>
- f3
- </entry>
- <entry>
- f4
- </entry>
- <entry>
- f5
- </entry>
-
- </row>
- </tfoot>
- --> <tbody>
- <row>
- <entry>
- Debian
- </entry>
- <entry>
- Lenny (oldstable)
- </entry>
- <entry>
- 5.0
- </entry>
- <entry>
- i386, amd64
- </entry>
- <entry>
- February 6th, 2012
- </entry>
-
- </row>
- <row>
- <entry>
- Debian
- </entry>
- <entry>
- Squeeze (stable)
- </entry>
- <entry>
- 6.0
- </entry>
- <entry>
- i386, amd64
- </entry>
- <entry>
- T.B.D.
- </entry>
-
- </row>
- <row condition="community">
- <entry>
- Debian
- </entry>
- <entry>
- Wheezy (testing)
- </entry>
- <entry>
- 7.0
- </entry>
- <entry>
- i386, amd64
- </entry>
- <entry>
- T.B.D.
- </entry>
-
- </row>
- <row condition="community">
- <entry>
- Debian
- </entry>
- <entry>
- Sid (unstable)
- </entry>
- <entry>
- N/A
- </entry>
- <entry>
- i386, amd64
- </entry>
- <entry>
- T.B.D.
- </entry>
-
- </row>
- <row condition="enterprise">
- <entry>
- Ubuntu
- </entry>
- <entry>
- Dapper
- </entry>
- <entry>
- 6.06 LTS
- </entry>
- <entry>
- i386, amd64
- </entry>
- <entry>
- T.B.D.
- </entry>
-
- </row>
- <row condition="enterprise">
- <entry>
- Ubuntu
- </entry>
- <entry>
- Hardy
- </entry>
- <entry>
- 8.04 LTS
- </entry>
- <entry>
- i386, amd64
- </entry>
- <entry>
- T.B.D.
- </entry>
-
- </row>
- <row condition="enterprise">
- <entry>
- Ubuntu
- </entry>
- <entry>
- Karmic
- </entry>
- <entry>
- 9.10
- </entry>
- <entry>
- i386, amd64
- </entry>
- <entry>
- T.B.D.
- </entry>
-
- </row>
- <row>
- <entry>
- Ubuntu
- </entry>
- <entry>
- Lucid
- </entry>
- <entry>
- 10.04 LTS
- </entry>
- <entry>
- i386, amd64
- </entry>
- <entry>
- T.B.D.
- </entry>
-
- </row>
- <row>
- <entry>
- Ubuntu
- </entry>
- <entry>
- Maverick
- </entry>
- <entry>
- 10.10
- </entry>
- <entry>
- i386, amd64
- </entry>
- <entry>
- T.B.D.
- </entry>
-
- </row>
- <row condition="community">
- <entry>
- Ubuntu
- </entry>
- <entry>
- Natty
- </entry>
- <entry>
- -
- </entry>
- <entry>
- i386, amd64
- </entry>
- <entry>
- T.B.D.
- </entry>
-
- </row>
-
- </tbody>
-
- </tgroup>
-
- </table>
-
- </para>
- <section id="sect-Community_Installation_Guide-Installation_with_APT_Packages-Debian">
- <title>Debian</title>
- <procedure>
- <step>
- <para>
- For Kolab &PRODUCT_VERSION; software packages for Debian Squeeze, add the following two lines to <filename>/etc/apt/sources.list</filename>:
- </para>
- <para condition="community">
-
-<screen>deb http://mirror.kolabsys.com/pub/debian/kolab-&PRODUCT_VERSION;/ squeeze release updates
-deb-src http://mirror.kolabsys.com/pub/debian/kolab-&PRODUCT_VERSION;/ squeeze release updates</screen>
-
- </para>
- <para condition="enterprise">
-
-<screen>deb https://mirror.kolabsys.com/debian/kolab-&PRODUCT_VERSION;/ squeeze release updates
-deb-src https://mirror.kolabsys.com/debian/kolab-&PRODUCT_VERSION;/ squeeze release updates</screen>
-
- </para>
- <note>
- <title>Updates in Testing Phase and Packages in Development</title>
- <para>
- Optionally, enable the <literal>updates-testing</literal> and <literal>development</literal> components for newer, but less stable packages.
- </para>
-
- </note>
- <para>
- For other versions of the Debian distribution, please replace <code>squeeze</code> with the corresponding distribution codename.
- </para>
- <important>
- <title>Debian Volatile (Updates) Repositories</title>
- <para>
- It is critically important to consider also enabling the so-called volatile repository for your Debian version, to enable updates for components such as <application>clamav</application>.
- </para>
- <para>
- To enable the volatile repository for Debian Lenny, include the following line in <filename>/etc/apt/sources.list</filename>:
- </para>
- <para>
-
-<screen>deb http://volatile.debian.org/debian-volatile stable/volatile main</screen>
-
- </para>
-
- </important>
-
- </step>
- <step>
- <para>
- To ensure the Kolab packages have priority over the Debian packages, such as must be the case for PHP as well as Cyrus IMAP, please make sure the APT preferences <emphasis>pin</emphasis> the mirror.kolabsys.com origin as a preferred source. Put the following in <filename>/etc/apt/preferences</filename>:
- </para>
- <para>
-
-<screen>Package: *
-Pin: origin mirror.kolabsys.com
-Pin-Priority: 501</screen>
-
- </para>
-
- </step>
- <step condition="enterprise">
- <para>
- Import the GPG key with which the repository metadata is signed:
- </para>
- <para>
-
-<screen>$ <userinput>gpg --search squeeze-packages at kolabsys.com</userinput></screen>
-
- </para>
- <para>
- For Debian Lenny, please replace <code>squeeze</code> with the corresponding distribution codename.
- </para>
-
- </step>
- <step condition="enterprise">
- <para>
- For access to the Enterprise edition, you have been issued a SSL certificate by Kolab Systems. How to obtain, renew and use the SSL certificate to provide you with access to the Enterprise editions, please read <ulink url="https://support.kolabsys.com/Obtaining,_Renewing_and_Using_a_Client_SSL_Certificate" />.
- </para>
-
- </step>
- <step>
- <para>
- Update the repository metadata:
- </para>
- <para>
-
-<screen># <userinput>apt-get update</userinput></screen>
-
- </para>
-
- </step>
- <step>
- <para>
- Start the installation of the base package as follows:
- </para>
- <para>
-
-<screen># <userinput>aptitude install kolabd</userinput></screen>
-
- </para>
-
- </step>
- <step>
- <para>
- When asked to confirm you want to install the package and its dependencies, press Enter.
- </para>
-
- </step>
- <step condition="community">
- <para>
- When asked to confirm you want to continue installing the packages of which the integrity nor source can be securely verified, press <keycap>y</keycap> then <keycap>Enter</keycap>.
- </para>
-
- </step>
-
- </procedure>
-
-
- </section>
-
- <section id="sect-Community_Installation_Guide-Installation_with_APT_Packages-Ubuntu">
- <title>Ubuntu</title>
- <procedure>
- <step>
- <para>
- For Kolab &PRODUCT_VERSION; software packages for Ubuntu Lucid, add the following two lines to <filename>/etc/apt/sources.list</filename>:
- </para>
- <para condition="community">
-
-<screen>deb http://mirror.kolabsys.com/pub/ubuntu/kolab-&PRODUCT_VERSION;/ lucid release updates
-deb-src http://mirror.kolabsys.com/pub/ubuntu/kolab-&PRODUCT_VERSION;/ lucid release updates</screen>
-
- </para>
- <para condition="enterprise">
-
-<screen>deb http://mirror.kolabsys.com/pub/ubuntu/kolab-&PRODUCT_VERSION;/ lucid release updates
-deb-src http://mirror.kolabsys.com/pub/ubuntu/kolab-&PRODUCT_VERSION;/ lucid release updates</screen>
-
- </para>
- <para>
- For other versions of the Ubuntu distribution, please replace <code>lucid</code> with the corresponding distribution codename.
- </para>
-
- </step>
- <step>
- <para>
- To ensure the Kolab packages have priority over the Ubuntu packages, such as must be the case for PHP as well as Cyrus IMAP, please make sure the APT preferences <emphasis>pin</emphasis> the mirror.kolabsys.com origin as a preferred source. Put the following in <filename>/etc/apt/preferences</filename>:
- </para>
- <para>
-
-<screen>Package: *
-Pin: origin mirror.kolabsys.com
-Pin-Priority: 501</screen>
-
- </para>
-
- </step>
-
- </procedure>
-
- <para condition="enterprise">
- For access to the Enterprise edition, you have been issued a SSL certificate by Kolab Systems. How to obtain, renew and use the SSL certificate to provide you with access to the Enterprise editions, please read <ulink url="https://support.kolabsys.com/Obtaining,_Renewing_and_Using_a_Client_SSL_Certificate" />.
- </para>
-
- </section>
-
- <section id="sect-Community_Installation_Guide-Installation_with_APT_Packages-Troubleshooting_the_APT_Package_Manager">
- <title>Troubleshooting the APT Package Manager</title>
- <section id="sect-Community_Installation_Guide-Troubleshooting_the_APT_Package_Manager-Broken_Packages">
- <title>Broken Packages</title>
- <para>
- If you get an error similar to, for example:
- </para>
- <para>
-
-<screen>test90-1:~# apt-get install kolabd
-Reading package lists... Done
-Building dependency tree
-Reading state information... Done
-Some packages could not be installed. This may mean that you have
-requested an impossible situation or if you are using the unstable
-distribution that some required packages have not yet been created
-or been moved out of Incoming.
-The following information may help to resolve the situation:
-
-The following packages have unmet dependencies:
- kolabd: Depends: postfix (>= 2.4) but it is not going to be installed
- Depends: postfix-ldap (>= 2.4) but it is not going to be installed
-E: Broken packages</screen>
-
- </para>
- <para>
- The error is not caused by broken packages, but a broken package manager that cannot install <application>exim</application> and <application>postfix</application> in parallel.
- </para>
- <formalpara id="form-Community_Installation_Guide-Broken_Packages-Solution">
- <title>Solution</title>
- <para>
- First remove any non-postfix MTA you may have installed, which in a default Debian installation is probably <application>exim</application>.
- </para>
-
- </formalpara>
- <para>
- To remove <application>exim</application>, execute the following with superuser privileges:
- </para>
- <para>
-
-<screen># <userinput>apt-get remove exim4 exim4-base exim4-config exim4-daemon-light</userinput></screen>
-
- </para>
- <para>
- Then continue installing Kolab:
- </para>
- <para>
-
-<screen># <userinput>aptitude install kolabd</userinput></screen>
-
- </para>
-
- </section>
-
-
- </section>
-
-
- </section>
-
- <section id="sect-Community_Installation_Guide-Repository_Configuration-Installation_with_RPM_Packages">
- <title>Installation with RPM Packages</title>
- <para>
- RPM packages are being provided for the following Linux distributions and versions:
- </para>
- <para>
- <table frame="all" id="tabl-Community_Installation_Guide-Installation_with_RPM_Packages-RPM_Packages_Distribution_Support">
- <title>RPM Packages Distribution Support</title>
- <tgroup align="left" cols="5" colsep="1" rowsep="1">
- <colspec colname="c1"></colspec>
- <colspec colname="c2"></colspec>
- <colspec colname="c3"></colspec>
- <colspec colname="c4"></colspec>
- <colspec colname="c5" colnum="5"></colspec>
- <thead>
- <row>
- <entry align="center" nameend="c4" namest="c1">
- Distribution Information
- </entry>
- <entry morerows="1">
- EOS / EOL Date
- </entry>
-
- </row>
- <row>
- <entry>
- Name
- </entry>
- <entry>
- CodeName
- </entry>
- <entry>
- Version
- </entry>
- <entry>
- Architectures
- </entry>
-
- </row>
-
- </thead>
- <!--
- <tfoot> <row>
- <entry>
- f1
- </entry>
- <entry>
- f2
- </entry>
- <entry>
- f3
- </entry>
- <entry>
- f4
- </entry>
- <entry>
- f5
- </entry>
-
- </row>
- </tfoot>
- --> <tbody>
- <row>
- <entry>
- CentOS
- </entry>
- <entry>
- -
- </entry>
- <entry>
- 5
- </entry>
- <entry>
- i386, amd64
- </entry>
- <entry>
- Approximately Q1, 2014
- </entry>
-
- </row>
- <row>
- <entry>
- CentOS
- </entry>
- <entry>
- -
- </entry>
- <entry>
- 6
- </entry>
- <entry>
- i386, amd64
- </entry>
- <entry>
- Approximately Q4, 2017
- </entry>
-
- </row>
- <!-- <row>
- <entry>
- Fedora
- </entry>
- <entry>
- Goddard
- </entry>
- <entry>
- 13
- </entry>
- <entry>
- i386, amd64
- </entry>
- <entry>
- Q2, 2011
- </entry>
-
- </row> --> <row>
- <entry>
- Fedora
- </entry>
- <entry>
- Laughlin
- </entry>
- <entry>
- 14
- </entry>
- <entry>
- i386, amd64
- </entry>
- <entry>
- Q4, 2011
- </entry>
-
- </row>
- <row>
- <entry>
- Fedora
- </entry>
- <entry>
- Lovelock
- </entry>
- <entry>
- 15
- </entry>
- <entry>
- i386, amd64
- </entry>
- <entry>
- Q2, 2012
- </entry>
-
- </row>
- <row>
- <entry>
- Red Hat Enterprise Linux
- </entry>
- <entry>
- Tikanga
- </entry>
- <entry>
- 5
- </entry>
- <entry>
- i386, amd64
- </entry>
- <entry>
- Approximately Q1, 2014
- </entry>
-
- </row>
- <row>
- <entry>
- Red Hat Enterprise Linux
- </entry>
- <entry>
- Santiago
- </entry>
- <entry>
- 6
- </entry>
- <entry>
- i386, amd64
- </entry>
- <entry>
- Approximately Q4, 2017
- </entry>
-
- </row>
-
- </tbody>
-
- </tgroup>
-
- </table>
-
- </para>
- <section id="sect-Community_Installation_Guide-Installation_with_RPM_Packages-Prerequisites">
- <title>Prerequisites</title>
- <para>
- Before the installation, it is necessary to install the configuration for the Kolab software repositories.
- </para>
- <section id="sect-Community_Installation_Guide-Prerequisites-CentOS">
- <title>CentOS</title>
- <para>
- For full instructions on installing Kolab Groupware on CentOS, please refer to the instructions in <xref linkend="sect-Community_Installation_Guide-Prerequisites-Red_Hat_Enterprise_Linux" />.
- </para>
- <note>
- <title>Disable 'addons' and 'extras' repositories</title>
- <para>
- Please be aware that on CentOS, you will need to disable the 'addons' and 'extras' repositories, as they contain packages not part of the Enterprise Linux base operating system.
- </para>
- <para>
- The disable these repositories, edit <filename>/etc/yum.repos.d/CentOS-Base.repo</filename> and append a setting <code>enabled=0</code> to sections <code>[addons]</code> and <code>[extras]</code>, or delete the sections entirely.
- </para>
-
- </note>
-
- </section>
-
- <section id="sect-Community_Installation_Guide-Prerequisites-Fedora">
- <title>Fedora</title>
- <para>
- To install Kolab Groupware on Fedora, additional Kolab Groupware software repositories are required.
- </para>
- <procedure id="proc-Community_Installation_Guide-Fedora-Installing_the_Kolab_Groupware_repositories_for_Fedora">
- <title>Installing the Kolab Groupware repositories for Fedora</title>
- <step>
- <para>
- Depending on the version of Fedora, install the following package:
- </para>
- <para>
- <itemizedlist>
- <listitem>
- <para>
- TODO
- </para>
-
- </listitem>
-
- </itemizedlist>
-
- </para>
-
- </step>
-
- </procedure>
-
-
- </section>
-
- <section id="sect-Community_Installation_Guide-Prerequisites-Red_Hat_Enterprise_Linux">
- <title>Red Hat Enterprise Linux</title>
- <para>
- The <ulink url="http://fedoraproject.org/wiki/EPEL">EPEL</ulink> repository is required for Kolab Groupware on Red Hat Enterprise Linux. Install the EPEL repository using the following procedure:
- </para>
- <procedure id="proc-Community_Installation_Guide-Red_Hat_Enterprise_Linux-Installing_the_epel_release_Package">
- <title>Installing the <application>epel-release</application> Package</title>
- <step>
- <para>
- Depending on the version of Red Hat Enterprise Linux, install the package as it is listed on the following page:
- </para>
- <para>
- <itemizedlist>
- <listitem>
- <para>
- <ulink url="http://download.fedora.redhat.com/pub/epel/5/i386/repoview/epel-release.html">Enterprise Linux 5</ulink> (Tikanga)
- </para>
-
- </listitem>
- <listitem>
- <para>
- <ulink url="http://download.fedora.redhat.com/pub/epel/6/i386/repoview/epel-release.html">Enterprise Linux 6</ulink> (Santiago)
- </para>
-
- </listitem>
-
- </itemizedlist>
-
- </para>
-
- </step>
- <step>
- <para>
- Install this package using the following command:
- </para>
- <para>
-
-<screen># <userinput>wget http://url/to/rpm</userinput>
-<userinput># yum localinstall --nogpgcheck /path/to/rpm</userinput></screen>
-
- </para>
-
- </step>
-
- </procedure>
-
- <para condition="enterprise">
- For access to the Enterprise edition, you must have been issued a SSL certificate by Kolab Systems. How to obtain, renew and use the SSL certificate to provide you with access to the Enterprise editions, please read <ulink url="https://support.kolabsys.com/Obtaining,_Renewing_and_Using_a_Client_SSL_Certificate" />.
- </para>
- <para>
- The Kolab software repositories for Red Hat Enterprise Linux ship two so-called <literal>-release</literal> packages:
- </para>
- <para>
- <orderedlist>
- <listitem condition="community">
- <para>
- <literal>kolab-&PRODUCT_VERSION;-community-release</literal>
- </para>
- <para>
- Depending on the version of Red Hat Enterprise Linux, find the <literal>-release</literal> package at:
- </para>
- <para>
- <itemizedlist>
- <listitem>
- <para>
- <ulink url="http://mirror.kolabsys.com/pub/redhat/kolab-2.4/el5/release/i386/repoview/kolab-2.4-community-release.html">Red Hat Enterprise Linux 5 (Tikanga)</ulink>
- </para>
-
- </listitem>
- <listitem>
- <para>
- <ulink url="http://mirror.kolabsys.com/pub/redhat/kolab-2.4/el6/release/i386/repoview/kolab-2.4-community-release.html">Red Hat Enterprise Linux 6 (Santiago)</ulink>
- </para>
-
- </listitem>
-
- </itemizedlist>
-
- </para>
-
- </listitem>
- <listitem condition="enterprise">
- <para>
- <literal>kolab-&PRODUCT_VERSION;-enterprise-release</literal>
- </para>
- <para>
- Depending on the version of Red Hat Enterprise Linux, find the <literal>-release</literal> package at:
- </para>
- <para>
- <itemizedlist>
- <listitem>
- <para>
- <ulink url="https://mirror.kolabsys.com/redhat/kolab-2.4/el5/release/i386/repoview/kolab-2.4-enterprise-release.html">Red Hat Enterprise Linux 5 (Tikanga)</ulink>
- </para>
-
- </listitem>
- <listitem>
- <para>
- <ulink url="https://mirror.kolabsys.com/redhat/kolab-2.4/el6/release/i386/repoview/kolab-2.4-enterprise-release.html">Red Hat Enterprise Linux 6 (Santiago)</ulink>
- </para>
-
- </listitem>
-
- </itemizedlist>
-
- </para>
-
- </listitem>
- <listitem condition="community">
- <para>
- <literal>kolab-&PRODUCT_VERSION;-community-release-development</literal>
- </para>
- <para>
- You can install the <literal>kolab-&PRODUCT_VERSION;-community-release-development</literal> package using YUM, after having installed the <literal>kolab-&PRODUCT_VERSION;-community-release</literal> package;
- </para>
- <para>
-
-<screen># <userinput>yum install kolab-&PRODUCT_VERSION;-community-release-development</userinput></screen>
-
- </para>
-
- </listitem>
- <listitem condition="enterprise">
- <para>
- <literal>kolab-&PRODUCT_VERSION;-enterprise-release-development</literal>
- </para>
- <para>
- You can install the <literal>kolab-&PRODUCT_VERSION;-enterprise-release-development</literal> package using YUM, after having installed the <literal>kolab-&PRODUCT_VERSION;-enterprise-release</literal> package;
- </para>
- <para>
-
-<screen># <userinput>yum install kolab-&PRODUCT_VERSION;-enterprise-release-development</userinput></screen>
-
- </para>
-
- </listitem>
-
- </orderedlist>
-
- </para>
- <formalpara id="form-Community_Installation_Guide-Red_Hat_Enterprise_Linux-Stable_Software">
- <title>Stable Software</title>
- <para>
- Stable software, versions of packages deemed ready for general availability and production environments are distributed through two repositories, <emphasis>release</emphasis> and <emphasis>updates</emphasis>. These repositories are configured on the system, and enabled by default, by installing the <literal condition="community">kolab-&PRODUCT_VERSION;-community-release</literal><literal condition="enterprise">kolab-&PRODUCT_VERSION;-enterprise-release</literal> package;
- </para>
-
- </formalpara>
- <formalpara id="form-Community_Installation_Guide-Red_Hat_Enterprise_Linux-Stable_Software_Currently_in_Testing">
- <title>Stable Software Currently in Testing</title>
- <para>
- The <literal condition="community">kolab-&PRODUCT_VERSION;-community-release</literal><literal condition="enterprise">kolab-&PRODUCT_VERSION;-enterprise-release</literal> package also installs a repository through which upcoming updates currently in their testing phase are distributed. This repository is called <emphasis>updates-testing</emphasis>, and is not enabled by default. Through Kolab Systems and/or community support channels, you may be asked to test an update distributed through the updates-testing repository to see if it fixes a bug you have reported. You would then, typically, temporarily enable the updates-testing repository by supplying the <literal>--enablerepo=kolab-2.4-updates-testing</literal> command-line option to YUM, overriding the system configuration file setting.
- </para>
-
- </formalpara>
- <formalpara id="form-Community_Installation_Guide-Red_Hat_Enterprise_Linux-Software_Currently_in_Development">
- <title>Software Currently in Development</title>
- <para>
- Software that is currently in development for the product series you are running (in this case, series &PRODUCT_VERSION;) is available through the so-called <emphasis>development</emphasis> repository. This software is considered unstable. By default, you will not have the package installed that provides the configuration for this repository; the <literal condition="community">kolab-&PRODUCT_VERSION;-community-release-development</literal><literal condition="enterprise">kolab-&PRODUCT_VERSION;-enterprise-release-development</literal> package. Installing this package will cause the <emphasis>development</emphasis> repository to be enabled by default.
- </para>
-
- </formalpara>
- <procedure id="proc-Community_Installation_Guide-Red_Hat_Enterprise_Linux-Installing_the_kolab_PRODUCT_VERSION_community_release_Package">
- <title>Installing the <application>kolab-&PRODUCT_VERSION;-community-release</application> Package</title>
- <step>
- <para>
- Depending on the version of Red Hat Enterprise Linux, install the package as it is listed on the following page:
- </para>
- <para>
- <itemizedlist>
- <listitem>
- <para>
- <ulink condition="community" url="http://mirror.kolabsys.com/pub/redhat/kolab-2.4/el5/release/i386/repoview/kolab-2.4-community-release.html">Enterprise Linux 5</ulink> <ulink condition="enterprise" url="https://mirror.kolabsys.com/redhat/kolab-2.4/el5/release/i386/repoview/kolab-2.4-enterprise-release.html">Enterprise Linux 5</ulink>
- </para>
- <para>
- <ulink condition="community" url="http://mirror.kolabsys.com/pub/redhat/kolab-2.4/el5/development/x86_64/">Enterprise Linux 5</ulink> <ulink condition="enterprise" url="https://mirror.kolabsys.com/redhat/kolab-2.4/el5/release/i386/repoview/kolab-2.4-enterprise-release.html">Enterprise Linux 5</ulink>
- </para>
-
- </listitem>
- <listitem>
- <para>
- <ulink condition="community" url="http://mirror.kolabsys.com/pub/redhat/kolab-2.4/el6/release/i386/repoview/kolab-2.4-community-release.html">Enterprise Linux 6</ulink> <ulink condition="enterprise" url="https://mirror.kolabsys.com/redhat/kolab-2.4/el6/release/i386/repoview/kolab-2.4-enterprise-release.html">Enterprise Linux 6</ulink>
- </para>
-
- </listitem>
-
- </itemizedlist>
-
- </para>
-
- </step>
- <step>
- <para>
- Install this package using the following command:
- </para>
- <para>
-
-<screen># <userinput>wget http://url/to/rpm</userinput>
-<userinput># yum localinstall --nogpgcheck /path/to/rpm</userinput></screen>
-
- </para>
-
- </step>
- <step>
- <para>
- To test the installation of the repository configuration, please execute:
- </para>
- <para>
-
-<screen># <userinput>yum repolist</userinput>
-(...snip...)
-kolab-&PRODUCT_VERSION;
-kolab-&PRODUCT_VERSION;-updates
-(...snip...)</screen>
-
- </para>
- <note>
- <title>Output Abbreviated</title>
- <para>
- Note that the output is abbreviated for clarity. The output may actually include the description of the repository, and the number of packages available.
- </para>
-
- </note>
- <para>
- Optionally, to see which repositories have been configured though not enabled, also execute:
- </para>
- <para>
-
-<screen># <userinput>yum repolist all</userinput>
-(...snip...)
-kolab-&PRODUCT_VERSION;
-kolab-&PRODUCT_VERSION;-debuginfo
-kolab-&PRODUCT_VERSION;-source
-kolab-&PRODUCT_VERSION;-updates
-kolab-&PRODUCT_VERSION;-updates-debuginfo
-kolab-&PRODUCT_VERSION;-updates-source
-kolab-&PRODUCT_VERSION;-updates-testing
-kolab-&PRODUCT_VERSION;-updates-testing-debuginfo
-kolab-&PRODUCT_VERSION;-updates-testing-source
-(...snip...)</screen>
-
- </para>
- <note>
- <title>Output Abbreviated</title>
- <para>
- Note that the output is abbreviated for clarity. The output may actually include the description of the repository, whether the repository is enabled by default or not, and the number of packages available in each repository as well as the total number of packages.
- </para>
-
- </note>
-
- </step>
- <step>
- <para>
- At this stage of the Kolab Groupware &PRODUCT_VERSION; development and release cycle, you may require to install the development repository as well. To do so, execute the following command:
- </para>
- <para>
-
-<screen># <userinput>yum -y install kolab-&PRODUCT_VERSION;-community-release-development</userinput></screen>
-
- </para>
- <warning>
- <title>Development Repository Contains Unstable Software</title>
- <para>
- The development repository contains unstable software, in that new versions of the software can be released through the development repository quickly, for testing purposes, before they are approved to the updates-testing stage.
- </para>
-
- </warning>
-
- </step>
-
- </procedure>
-
- <para>
- Please consider using <application>yum-priorities</application> as described in <xref linkend="sect-Community_Installation_Guide-Prerequisites-Using_yum_priorities_to_Avoid_Package_Conflicts" />. This is necessary for Enterprise Linux releases prior to Enterprise Linux 6 only.
- </para>
-
- </section>
-
- <section id="sect-Community_Installation_Guide-Prerequisites-Using_yum_priorities_to_Avoid_Package_Conflicts">
- <title>Using <application>yum-priorities</application> to Avoid Package Conflicts</title>
- <para>
- Since any given package may, at any time, be or become available to the system through both the Kolab repositories as well as through the regular distribution repositories, to avoid the risk of switching back and forth between the two different versions continuously, by mistake or by accident, we recommend you use the following procedure including employing YUM repository priorities to eliminate the risk of running in such problems in the future.
- </para>
- <note>
- <para>
- This is necessary only for Enterprise Linux 5.
- </para>
-
- </note>
- <procedure id="proc-Community_Installation_Guide-Using_yum_priorities_to_Avoid_Package_Conflicts-Installing_and_Configuring_YUM_priorities">
- <title>Installing and Configuring YUM priorities</title>
- <step>
- <para>
- The <application>yum-priorities</application> is available from the <ulink url="http://fedoraproject.org/wiki/EPEL">package repository</ulink>. Please install it:
- </para>
- <para>
-
-<screen># <userinput>yum install yum-priorities</userinput></screen>
-
- </para>
-
- </step>
- <step>
- <para>
- The repositories that have been installed using the <literal condition="community">kolab-&PRODUCT_VERSION;-community-release</literal><literal condition="enterprise">kolab-&PRODUCT_VERSION;-enterprise-release</literal> package(s) have a pre-configured priority of <code>50</code>. The default repository priority is <code>99</code>. This will set the correct priorities, unless you have repositories configured other than the base operating system repositories (not including 'addons' and 'extras' on CentOS platforms), EPEL and the Kolab Groupware repositories. Should the system happen to already make use of YUM priorities, please make sure the Kolab repositories have the appropriate priority.
- </para>
-
- </step>
-
- </procedure>
-
-
- </section>
-
-
- </section>
-
-
- </section>
-
+ <xi:include href="sect-Repository_Configuration-Installation_with_APT_Packages.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <xi:include href="sect-Repository_Configuration-Installation_with_RPM_Packages.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
</section>
diff --git a/Installation_Guide/en-US/sect-Repository_Configuration-Installation_with_APT_Packages.xml b/Installation_Guide/en-US/sect-Repository_Configuration-Installation_with_APT_Packages.xml
new file mode 100644
index 0000000..3bd2e59
--- /dev/null
+++ b/Installation_Guide/en-US/sect-Repository_Configuration-Installation_with_APT_Packages.xml
@@ -0,0 +1,481 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+<!ENTITY % BOOK_ENTITIES SYSTEM "Community_Installation_Guide.ent">
+%BOOK_ENTITIES;
+]>
+<section id="sect-Community_Installation_Guide-Installation_with_APT_Packages">
+ <title>Installation with APT Packages</title>
+ <para>
+ APT packages are provided for the following GNU/Linux distributions, and distribution versions:
+ </para>
+ <para>
+ <table frame="all" id="tabl-Community_Installation_Guide-Installation_with_APT_Packages-APT_Packages_Distribution_Support">
+ <title>APT Packages Distribution Support</title>
+ <tgroup align="left" cols="5" colsep="1" rowsep="1">
+ <colspec colname="c1"></colspec>
+ <colspec colname="c2"></colspec>
+ <colspec colname="c3"></colspec>
+ <colspec colname="c4"></colspec>
+ <colspec colname="c5" colnum="5"></colspec>
+ <thead>
+ <row>
+ <entry align="center" nameend="c4" namest="c1">
+ Distribution Information
+ </entry>
+ <entry morerows="1">
+ EOS / EOL Date
+ </entry>
+
+ </row>
+ <row>
+ <entry>
+ Name
+ </entry>
+ <entry>
+ CodeName
+ </entry>
+ <entry>
+ Version
+ </entry>
+ <entry>
+ Architectures
+ </entry>
+
+ </row>
+
+ </thead>
+ <!--
+ <tfoot> <row>
+ <entry>
+ f1
+ </entry>
+ <entry>
+ f2
+ </entry>
+ <entry>
+ f3
+ </entry>
+ <entry>
+ f4
+ </entry>
+ <entry>
+ f5
+ </entry>
+
+ </row>
+ </tfoot>
+ --> <tbody>
+ <row>
+ <entry>
+ Debian
+ </entry>
+ <entry>
+ Lenny (oldstable)
+ </entry>
+ <entry>
+ 5.0
+ </entry>
+ <entry>
+ i386, amd64
+ </entry>
+ <entry>
+ February 6th, 2012
+ </entry>
+
+ </row>
+ <row>
+ <entry>
+ Debian
+ </entry>
+ <entry>
+ Squeeze (stable)
+ </entry>
+ <entry>
+ 6.0
+ </entry>
+ <entry>
+ i386, amd64
+ </entry>
+ <entry>
+ T.B.D.
+ </entry>
+
+ </row>
+ <row condition="community">
+ <entry>
+ Debian
+ </entry>
+ <entry>
+ Wheezy (testing)
+ </entry>
+ <entry>
+ 7.0
+ </entry>
+ <entry>
+ i386, amd64
+ </entry>
+ <entry>
+ T.B.D.
+ </entry>
+
+ </row>
+ <row condition="community">
+ <entry>
+ Debian
+ </entry>
+ <entry>
+ Sid (unstable)
+ </entry>
+ <entry>
+ N/A
+ </entry>
+ <entry>
+ i386, amd64
+ </entry>
+ <entry>
+ T.B.D.
+ </entry>
+
+ </row>
+ <row condition="enterprise">
+ <entry>
+ Ubuntu
+ </entry>
+ <entry>
+ Dapper
+ </entry>
+ <entry>
+ 6.06 LTS
+ </entry>
+ <entry>
+ i386, amd64
+ </entry>
+ <entry>
+ T.B.D.
+ </entry>
+
+ </row>
+ <row condition="enterprise">
+ <entry>
+ Ubuntu
+ </entry>
+ <entry>
+ Hardy
+ </entry>
+ <entry>
+ 8.04 LTS
+ </entry>
+ <entry>
+ i386, amd64
+ </entry>
+ <entry>
+ T.B.D.
+ </entry>
+
+ </row>
+ <row condition="enterprise">
+ <entry>
+ Ubuntu
+ </entry>
+ <entry>
+ Karmic
+ </entry>
+ <entry>
+ 9.10
+ </entry>
+ <entry>
+ i386, amd64
+ </entry>
+ <entry>
+ T.B.D.
+ </entry>
+
+ </row>
+ <row>
+ <entry>
+ Ubuntu
+ </entry>
+ <entry>
+ Lucid
+ </entry>
+ <entry>
+ 10.04 LTS
+ </entry>
+ <entry>
+ i386, amd64
+ </entry>
+ <entry>
+ T.B.D.
+ </entry>
+
+ </row>
+ <row>
+ <entry>
+ Ubuntu
+ </entry>
+ <entry>
+ Maverick
+ </entry>
+ <entry>
+ 10.10
+ </entry>
+ <entry>
+ i386, amd64
+ </entry>
+ <entry>
+ T.B.D.
+ </entry>
+
+ </row>
+ <row condition="community">
+ <entry>
+ Ubuntu
+ </entry>
+ <entry>
+ Natty
+ </entry>
+ <entry>
+ -
+ </entry>
+ <entry>
+ i386, amd64
+ </entry>
+ <entry>
+ T.B.D.
+ </entry>
+
+ </row>
+
+ </tbody>
+
+ </tgroup>
+
+ </table>
+
+ </para>
+ <section id="sect-Community_Installation_Guide-Installation_with_APT_Packages-Debian">
+ <title>Debian</title>
+ <procedure>
+ <step>
+ <para>
+ For Kolab &PRODUCT_VERSION; software packages for Debian Squeeze, add the following two lines to <filename>/etc/apt/sources.list</filename>:
+ </para>
+ <para condition="community">
+
+<screen>deb http://mirror.kolabsys.com/pub/debian/kolab-&PRODUCT_VERSION;/ squeeze release updates
+deb-src http://mirror.kolabsys.com/pub/debian/kolab-&PRODUCT_VERSION;/ squeeze release updates</screen>
+
+ </para>
+ <para condition="enterprise">
+
+<screen>deb https://mirror.kolabsys.com/debian/kolab-&PRODUCT_VERSION;/ squeeze release updates
+deb-src https://mirror.kolabsys.com/debian/kolab-&PRODUCT_VERSION;/ squeeze release updates</screen>
+
+ </para>
+ <note>
+ <title>Updates in Testing Phase and Packages in Development</title>
+ <para>
+ Optionally, enable the <literal>updates-testing</literal> and <literal>development</literal> components for newer, but less stable packages.
+ </para>
+
+ </note>
+ <para>
+ For other versions of the Debian distribution, please replace <code>squeeze</code> with the corresponding distribution codename.
+ </para>
+ <important>
+ <title>Debian Volatile (Updates) Repositories</title>
+ <para>
+ It is critically important to consider also enabling the so-called volatile repository for your Debian version, to enable updates for components such as <application>clamav</application>.
+ </para>
+ <para>
+ To enable the volatile repository for Debian Lenny, include the following line in <filename>/etc/apt/sources.list</filename>:
+ </para>
+ <para>
+
+<screen>deb http://volatile.debian.org/debian-volatile stable/volatile main</screen>
+
+ </para>
+
+ </important>
+
+ </step>
+ <step>
+ <para>
+ To ensure the Kolab packages have priority over the Debian packages, such as must be the case for PHP as well as Cyrus IMAP, please make sure the APT preferences <emphasis>pin</emphasis> the mirror.kolabsys.com origin as a preferred source. Put the following in <filename>/etc/apt/preferences</filename>:
+ </para>
+ <para>
+
+<screen>Package: *
+Pin: origin mirror.kolabsys.com
+Pin-Priority: 501</screen>
+
+ </para>
+
+ </step>
+ <step condition="enterprise">
+ <para>
+ Import the GPG key with which the repository metadata is signed:
+ </para>
+ <para>
+
+<screen>$ <userinput>gpg --search squeeze-packages at kolabsys.com</userinput></screen>
+
+ </para>
+ <para>
+ For Debian Lenny, please replace <code>squeeze</code> with the corresponding distribution codename.
+ </para>
+
+ </step>
+ <step condition="enterprise">
+ <para>
+ For access to the Enterprise edition, you have been issued a SSL certificate by Kolab Systems. How to obtain, renew and use the SSL certificate to provide you with access to the Enterprise editions, please read <ulink url="https://support.kolabsys.com/Obtaining,_Renewing_and_Using_a_Client_SSL_Certificate" />.
+ </para>
+
+ </step>
+ <step>
+ <para>
+ Update the repository metadata:
+ </para>
+ <para>
+
+<screen># <userinput>apt-get update</userinput></screen>
+
+ </para>
+
+ </step>
+ <step>
+ <para>
+ Start the installation of the base package as follows:
+ </para>
+ <para>
+
+<screen># <userinput>aptitude install kolabd</userinput></screen>
+
+ </para>
+
+ </step>
+ <step>
+ <para>
+ When asked to confirm you want to install the package and its dependencies, press Enter.
+ </para>
+
+ </step>
+ <step condition="community">
+ <para>
+ When asked to confirm you want to continue installing the packages of which the integrity nor source can be securely verified, press <keycap>y</keycap> then <keycap>Enter</keycap>.
+ </para>
+
+ </step>
+
+ </procedure>
+
+
+ </section>
+
+ <section id="sect-Community_Installation_Guide-Installation_with_APT_Packages-Ubuntu">
+ <title>Ubuntu</title>
+ <procedure>
+ <step>
+ <para>
+ For Kolab &PRODUCT_VERSION; software packages for Ubuntu Lucid, add the following two lines to <filename>/etc/apt/sources.list</filename>:
+ </para>
+ <para condition="community">
+
+<screen>deb http://mirror.kolabsys.com/pub/ubuntu/kolab-&PRODUCT_VERSION;/ lucid release updates
+deb-src http://mirror.kolabsys.com/pub/ubuntu/kolab-&PRODUCT_VERSION;/ lucid release updates</screen>
+
+ </para>
+ <para condition="enterprise">
+
+<screen>deb http://mirror.kolabsys.com/pub/ubuntu/kolab-&PRODUCT_VERSION;/ lucid release updates
+deb-src http://mirror.kolabsys.com/pub/ubuntu/kolab-&PRODUCT_VERSION;/ lucid release updates</screen>
+
+ </para>
+ <para>
+ For other versions of the Ubuntu distribution, please replace <code>lucid</code> with the corresponding distribution codename.
+ </para>
+
+ </step>
+ <step>
+ <para>
+ To ensure the Kolab packages have priority over the Ubuntu packages, such as must be the case for PHP as well as Cyrus IMAP, please make sure the APT preferences <emphasis>pin</emphasis> the mirror.kolabsys.com origin as a preferred source. Put the following in <filename>/etc/apt/preferences</filename>:
+ </para>
+ <para>
+
+<screen>Package: *
+Pin: origin mirror.kolabsys.com
+Pin-Priority: 501</screen>
+
+ </para>
+
+ </step>
+
+ </procedure>
+
+ <para condition="enterprise">
+ For access to the Enterprise edition, you have been issued a SSL certificate by Kolab Systems. How to obtain, renew and use the SSL certificate to provide you with access to the Enterprise editions, please read <ulink url="https://support.kolabsys.com/Obtaining,_Renewing_and_Using_a_Client_SSL_Certificate" />.
+ </para>
+
+ </section>
+
+ <section id="sect-Community_Installation_Guide-Installation_with_APT_Packages-Troubleshooting_the_APT_Package_Manager">
+ <title>Troubleshooting the APT Package Manager</title>
+ <section id="sect-Community_Installation_Guide-Troubleshooting_the_APT_Package_Manager-Broken_Packages">
+ <title>Broken Packages</title>
+ <para>
+ If you get an error similar to, for example:
+ </para>
+ <para>
+
+<screen>test90-1:~# apt-get install kolabd
+Reading package lists... Done
+Building dependency tree
+Reading state information... Done
+Some packages could not be installed. This may mean that you have
+requested an impossible situation or if you are using the unstable
+distribution that some required packages have not yet been created
+or been moved out of Incoming.
+The following information may help to resolve the situation:
+
+The following packages have unmet dependencies:
+ kolabd: Depends: postfix (>= 2.4) but it is not going to be installed
+ Depends: postfix-ldap (>= 2.4) but it is not going to be installed
+E: Broken packages</screen>
+
+ </para>
+ <para>
+ The error is not caused by broken packages, but a broken package manager that cannot install <application>exim</application> and <application>postfix</application> in parallel.
+ </para>
+ <formalpara id="form-Community_Installation_Guide-Broken_Packages-Solution">
+ <title>Solution</title>
+ <para>
+ First remove any non-postfix MTA you may have installed, which in a default Debian installation is probably <application>exim</application>.
+ </para>
+
+ </formalpara>
+ <para>
+ To remove <application>exim</application>, execute the following with superuser privileges:
+ </para>
+ <para>
+
+<screen># <userinput>apt-get remove exim4 exim4-base exim4-config exim4-daemon-light</userinput></screen>
+
+ </para>
+ <para>
+ Then continue installing Kolab:
+ </para>
+ <para>
+
+<screen># <userinput>aptitude install kolabd</userinput></screen>
+
+ </para>
+
+ </section>
+
+
+ </section>
+
+
+</section>
+
+
diff --git a/Installation_Guide/en-US/sect-Repository_Configuration-Installation_with_RPM_Packages.xml b/Installation_Guide/en-US/sect-Repository_Configuration-Installation_with_RPM_Packages.xml
new file mode 100644
index 0000000..d97fa2d
--- /dev/null
+++ b/Installation_Guide/en-US/sect-Repository_Configuration-Installation_with_RPM_Packages.xml
@@ -0,0 +1,574 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+<!ENTITY % BOOK_ENTITIES SYSTEM "Community_Installation_Guide.ent">
+%BOOK_ENTITIES;
+]>
+<section id="sect-Community_Installation_Guide-Installation_with_RPM_Packages">
+ <title>Installation with RPM Packages</title>
+ <para>
+ RPM packages are being provided for the following Linux distributions and versions:
+ </para>
+ <para>
+ <table frame="all" id="tabl-Community_Installation_Guide-Installation_with_RPM_Packages-RPM_Packages_Distribution_Support">
+ <title>RPM Packages Distribution Support</title>
+ <tgroup align="left" cols="5" colsep="1" rowsep="1">
+ <colspec colname="c1"></colspec>
+ <colspec colname="c2"></colspec>
+ <colspec colname="c3"></colspec>
+ <colspec colname="c4"></colspec>
+ <colspec colname="c5" colnum="5"></colspec>
+ <thead>
+ <row>
+ <entry align="center" nameend="c4" namest="c1">
+ Distribution Information
+ </entry>
+ <entry morerows="1">
+ EOS / EOL Date
+ </entry>
+
+ </row>
+ <row>
+ <entry>
+ Name
+ </entry>
+ <entry>
+ CodeName
+ </entry>
+ <entry>
+ Version
+ </entry>
+ <entry>
+ Architectures
+ </entry>
+
+ </row>
+
+ </thead>
+ <!--
+ <tfoot> <row>
+ <entry>
+ f1
+ </entry>
+ <entry>
+ f2
+ </entry>
+ <entry>
+ f3
+ </entry>
+ <entry>
+ f4
+ </entry>
+ <entry>
+ f5
+ </entry>
+
+ </row>
+ </tfoot>
+ --> <tbody>
+ <row>
+ <entry>
+ CentOS
+ </entry>
+ <entry>
+ -
+ </entry>
+ <entry>
+ 5
+ </entry>
+ <entry>
+ i386, amd64
+ </entry>
+ <entry>
+ Approximately Q1, 2014
+ </entry>
+
+ </row>
+ <row>
+ <entry>
+ CentOS
+ </entry>
+ <entry>
+ -
+ </entry>
+ <entry>
+ 6
+ </entry>
+ <entry>
+ i386, amd64
+ </entry>
+ <entry>
+ Approximately Q4, 2017
+ </entry>
+
+ </row>
+ <!-- <row>
+ <entry>
+ Fedora
+ </entry>
+ <entry>
+ Goddard
+ </entry>
+ <entry>
+ 13
+ </entry>
+ <entry>
+ i386, amd64
+ </entry>
+ <entry>
+ Q2, 2011
+ </entry>
+
+ </row> --> <row>
+ <entry>
+ Fedora
+ </entry>
+ <entry>
+ Laughlin
+ </entry>
+ <entry>
+ 14
+ </entry>
+ <entry>
+ i386, amd64
+ </entry>
+ <entry>
+ Q4, 2011
+ </entry>
+
+ </row>
+ <row>
+ <entry>
+ Fedora
+ </entry>
+ <entry>
+ Lovelock
+ </entry>
+ <entry>
+ 15
+ </entry>
+ <entry>
+ i386, amd64
+ </entry>
+ <entry>
+ Q2, 2012
+ </entry>
+
+ </row>
+ <row>
+ <entry>
+ Red Hat Enterprise Linux
+ </entry>
+ <entry>
+ Tikanga
+ </entry>
+ <entry>
+ 5
+ </entry>
+ <entry>
+ i386, amd64
+ </entry>
+ <entry>
+ Approximately Q1, 2014
+ </entry>
+
+ </row>
+ <row>
+ <entry>
+ Red Hat Enterprise Linux
+ </entry>
+ <entry>
+ Santiago
+ </entry>
+ <entry>
+ 6
+ </entry>
+ <entry>
+ i386, amd64
+ </entry>
+ <entry>
+ Approximately Q4, 2017
+ </entry>
+
+ </row>
+
+ </tbody>
+
+ </tgroup>
+
+ </table>
+
+ </para>
+ <section id="sect-Community_Installation_Guide-Installation_with_RPM_Packages-Prerequisites">
+ <title>Prerequisites</title>
+ <para>
+ Before the installation, it is necessary to install the configuration for the Kolab software repositories.
+ </para>
+ <section id="sect-Community_Installation_Guide-Prerequisites-CentOS">
+ <title>CentOS</title>
+ <para>
+ For full instructions on installing Kolab Groupware on CentOS, please refer to the instructions in <xref linkend="sect-Community_Installation_Guide-Prerequisites-Red_Hat_Enterprise_Linux" />.
+ </para>
+ <note>
+ <title>Disable 'addons' and 'extras' repositories</title>
+ <para>
+ Please be aware that on CentOS, you will need to disable the 'addons' and 'extras' repositories, as they contain packages not part of the Enterprise Linux base operating system.
+ </para>
+ <para>
+ The disable these repositories, edit <filename>/etc/yum.repos.d/CentOS-Base.repo</filename> and append a setting <code>enabled=0</code> to sections <code>[addons]</code> and <code>[extras]</code>, or delete the sections entirely.
+ </para>
+
+ </note>
+
+ </section>
+
+ <section id="sect-Community_Installation_Guide-Prerequisites-Fedora">
+ <title>Fedora</title>
+ <para>
+ To install Kolab Groupware on Fedora, additional Kolab Groupware software repositories are required.
+ </para>
+ <procedure id="proc-Community_Installation_Guide-Fedora-Installing_the_Kolab_Groupware_repositories_for_Fedora">
+ <title>Installing the Kolab Groupware repositories for Fedora</title>
+ <step>
+ <para>
+ Depending on the version of Fedora, install the following package:
+ </para>
+ <para>
+ <itemizedlist>
+ <listitem>
+ <para>
+ TODO
+ </para>
+
+ </listitem>
+
+ </itemizedlist>
+
+ </para>
+
+ </step>
+
+ </procedure>
+
+
+ </section>
+
+ <section id="sect-Community_Installation_Guide-Prerequisites-Red_Hat_Enterprise_Linux">
+ <title>Red Hat Enterprise Linux</title>
+ <para>
+ The <ulink url="http://fedoraproject.org/wiki/EPEL">EPEL</ulink> repository is required for Kolab Groupware on Red Hat Enterprise Linux. Install the EPEL repository using the following procedure:
+ </para>
+ <procedure id="proc-Community_Installation_Guide-Red_Hat_Enterprise_Linux-Installing_the_epel_release_Package">
+ <title>Installing the <application>epel-release</application> Package</title>
+ <step>
+ <para>
+ Depending on the version of Red Hat Enterprise Linux, install the package as it is listed on the following page:
+ </para>
+ <para>
+ <itemizedlist>
+ <listitem>
+ <para>
+ <ulink url="http://download.fedora.redhat.com/pub/epel/5/i386/repoview/epel-release.html">Enterprise Linux 5</ulink> (Tikanga)
+ </para>
+
+ </listitem>
+ <listitem>
+ <para>
+ <ulink url="http://download.fedora.redhat.com/pub/epel/6/i386/repoview/epel-release.html">Enterprise Linux 6</ulink> (Santiago)
+ </para>
+
+ </listitem>
+
+ </itemizedlist>
+
+ </para>
+
+ </step>
+ <step>
+ <para>
+ Install this package using the following command:
+ </para>
+ <para>
+
+<screen># <userinput>wget http://url/to/rpm</userinput>
+<userinput># yum localinstall --nogpgcheck /path/to/rpm</userinput></screen>
+
+ </para>
+
+ </step>
+
+ </procedure>
+
+ <para condition="enterprise">
+ For access to the Enterprise edition, you must have been issued a SSL certificate by Kolab Systems. How to obtain, renew and use the SSL certificate to provide you with access to the Enterprise editions, please read <ulink url="https://support.kolabsys.com/Obtaining,_Renewing_and_Using_a_Client_SSL_Certificate" />.
+ </para>
+ <para>
+ The Kolab software repositories for Red Hat Enterprise Linux ship two so-called <literal>-release</literal> packages:
+ </para>
+ <para>
+ <orderedlist>
+ <listitem condition="community">
+ <para>
+ <literal>kolab-&PRODUCT_VERSION;-community-release</literal>
+ </para>
+ <para>
+ Depending on the version of Red Hat Enterprise Linux, find the <literal>-release</literal> package at:
+ </para>
+ <para>
+ <itemizedlist>
+ <listitem>
+ <para>
+ <ulink url="http://mirror.kolabsys.com/pub/redhat/kolab-2.4/el5/release/i386/repoview/kolab-2.4-community-release.html">Red Hat Enterprise Linux 5 (Tikanga)</ulink>
+ </para>
+
+ </listitem>
+ <listitem>
+ <para>
+ <ulink url="http://mirror.kolabsys.com/pub/redhat/kolab-2.4/el6/release/i386/repoview/kolab-2.4-community-release.html">Red Hat Enterprise Linux 6 (Santiago)</ulink>
+ </para>
+
+ </listitem>
+
+ </itemizedlist>
+
+ </para>
+
+ </listitem>
+ <listitem condition="enterprise">
+ <para>
+ <literal>kolab-&PRODUCT_VERSION;-enterprise-release</literal>
+ </para>
+ <para>
+ Depending on the version of Red Hat Enterprise Linux, find the <literal>-release</literal> package at:
+ </para>
+ <para>
+ <itemizedlist>
+ <listitem>
+ <para>
+ <ulink url="https://mirror.kolabsys.com/redhat/kolab-2.4/el5/release/i386/repoview/kolab-2.4-enterprise-release.html">Red Hat Enterprise Linux 5 (Tikanga)</ulink>
+ </para>
+
+ </listitem>
+ <listitem>
+ <para>
+ <ulink url="https://mirror.kolabsys.com/redhat/kolab-2.4/el6/release/i386/repoview/kolab-2.4-enterprise-release.html">Red Hat Enterprise Linux 6 (Santiago)</ulink>
+ </para>
+
+ </listitem>
+
+ </itemizedlist>
+
+ </para>
+
+ </listitem>
+ <listitem condition="community">
+ <para>
+ <literal>kolab-&PRODUCT_VERSION;-community-release-development</literal>
+ </para>
+ <para>
+ You can install the <literal>kolab-&PRODUCT_VERSION;-community-release-development</literal> package using YUM, after having installed the <literal>kolab-&PRODUCT_VERSION;-community-release</literal> package;
+ </para>
+ <para>
+
+<screen># <userinput>yum install kolab-&PRODUCT_VERSION;-community-release-development</userinput></screen>
+
+ </para>
+
+ </listitem>
+ <listitem condition="enterprise">
+ <para>
+ <literal>kolab-&PRODUCT_VERSION;-enterprise-release-development</literal>
+ </para>
+ <para>
+ You can install the <literal>kolab-&PRODUCT_VERSION;-enterprise-release-development</literal> package using YUM, after having installed the <literal>kolab-&PRODUCT_VERSION;-enterprise-release</literal> package;
+ </para>
+ <para>
+
+<screen># <userinput>yum install kolab-&PRODUCT_VERSION;-enterprise-release-development</userinput></screen>
+
+ </para>
+
+ </listitem>
+
+ </orderedlist>
+
+ </para>
+ <formalpara id="form-Community_Installation_Guide-Red_Hat_Enterprise_Linux-Stable_Software">
+ <title>Stable Software</title>
+ <para>
+ Stable software, versions of packages deemed ready for general availability and production environments are distributed through two repositories, <emphasis>release</emphasis> and <emphasis>updates</emphasis>. These repositories are configured on the system, and enabled by default, by installing the <literal condition="community">kolab-&PRODUCT_VERSION;-community-release</literal><literal condition="enterprise">kolab-&PRODUCT_VERSION;-enterprise-release</literal> package;
+ </para>
+
+ </formalpara>
+ <formalpara id="form-Community_Installation_Guide-Red_Hat_Enterprise_Linux-Stable_Software_Currently_in_Testing">
+ <title>Stable Software Currently in Testing</title>
+ <para>
+ The <literal condition="community">kolab-&PRODUCT_VERSION;-community-release</literal><literal condition="enterprise">kolab-&PRODUCT_VERSION;-enterprise-release</literal> package also installs a repository through which upcoming updates currently in their testing phase are distributed. This repository is called <emphasis>updates-testing</emphasis>, and is not enabled by default. Through Kolab Systems and/or community support channels, you may be asked to test an update distributed through the updates-testing repository to see if it fixes a bug you have reported. You would then, typically, temporarily enable the updates-testing repository by supplying the <literal>--enablerepo=kolab-2.4-updates-testing</literal> command-line option to YUM, overriding the system configuration file setting.
+ </para>
+
+ </formalpara>
+ <formalpara id="form-Community_Installation_Guide-Red_Hat_Enterprise_Linux-Software_Currently_in_Development">
+ <title>Software Currently in Development</title>
+ <para>
+ Software that is currently in development for the product series you are running (in this case, series &PRODUCT_VERSION;) is available through the so-called <emphasis>development</emphasis> repository. This software is considered unstable. By default, you will not have the package installed that provides the configuration for this repository; the <literal condition="community">kolab-&PRODUCT_VERSION;-community-release-development</literal><literal condition="enterprise">kolab-&PRODUCT_VERSION;-enterprise-release-development</literal> package. Installing this package will cause the <emphasis>development</emphasis> repository to be enabled by default.
+ </para>
+
+ </formalpara>
+ <procedure id="proc-Community_Installation_Guide-Red_Hat_Enterprise_Linux-Installing_the_kolab_PRODUCT_VERSION_community_release_Package">
+ <title>Installing the <application>kolab-&PRODUCT_VERSION;-community-release</application> Package</title>
+ <step>
+ <para>
+ Depending on the version of Red Hat Enterprise Linux, install the package as it is listed on the following page:
+ </para>
+ <para>
+ <itemizedlist>
+ <listitem>
+ <para>
+ <ulink condition="community" url="http://mirror.kolabsys.com/pub/redhat/kolab-2.4/el5/release/i386/repoview/kolab-2.4-community-release.html">Enterprise Linux 5</ulink> <ulink condition="enterprise" url="https://mirror.kolabsys.com/redhat/kolab-2.4/el5/release/i386/repoview/kolab-2.4-enterprise-release.html">Enterprise Linux 5</ulink>
+ </para>
+ <para>
+ <ulink condition="community" url="http://mirror.kolabsys.com/pub/redhat/kolab-2.4/el5/development/x86_64/">Enterprise Linux 5</ulink> <ulink condition="enterprise" url="https://mirror.kolabsys.com/redhat/kolab-2.4/el5/release/i386/repoview/kolab-2.4-enterprise-release.html">Enterprise Linux 5</ulink>
+ </para>
+
+ </listitem>
+ <listitem>
+ <para>
+ <ulink condition="community" url="http://mirror.kolabsys.com/pub/redhat/kolab-2.4/el6/release/i386/repoview/kolab-2.4-community-release.html">Enterprise Linux 6</ulink> <ulink condition="enterprise" url="https://mirror.kolabsys.com/redhat/kolab-2.4/el6/release/i386/repoview/kolab-2.4-enterprise-release.html">Enterprise Linux 6</ulink>
+ </para>
+
+ </listitem>
+
+ </itemizedlist>
+
+ </para>
+
+ </step>
+ <step>
+ <para>
+ Install this package using the following command:
+ </para>
+ <para>
+
+<screen># <userinput>wget http://url/to/rpm</userinput>
+<userinput># yum localinstall --nogpgcheck /path/to/rpm</userinput></screen>
+
+ </para>
+
+ </step>
+ <step>
+ <para>
+ To test the installation of the repository configuration, please execute:
+ </para>
+ <para>
+
+<screen># <userinput>yum repolist</userinput>
+(...snip...)
+kolab-&PRODUCT_VERSION;
+kolab-&PRODUCT_VERSION;-updates
+(...snip...)</screen>
+
+ </para>
+ <note>
+ <title>Output Abbreviated</title>
+ <para>
+ Note that the output is abbreviated for clarity. The output may actually include the description of the repository, and the number of packages available.
+ </para>
+
+ </note>
+ <para>
+ Optionally, to see which repositories have been configured though not enabled, also execute:
+ </para>
+ <para>
+
+<screen># <userinput>yum repolist all</userinput>
+(...snip...)
+kolab-&PRODUCT_VERSION;
+kolab-&PRODUCT_VERSION;-debuginfo
+kolab-&PRODUCT_VERSION;-source
+kolab-&PRODUCT_VERSION;-updates
+kolab-&PRODUCT_VERSION;-updates-debuginfo
+kolab-&PRODUCT_VERSION;-updates-source
+kolab-&PRODUCT_VERSION;-updates-testing
+kolab-&PRODUCT_VERSION;-updates-testing-debuginfo
+kolab-&PRODUCT_VERSION;-updates-testing-source
+(...snip...)</screen>
+
+ </para>
+ <note>
+ <title>Output Abbreviated</title>
+ <para>
+ Note that the output is abbreviated for clarity. The output may actually include the description of the repository, whether the repository is enabled by default or not, and the number of packages available in each repository as well as the total number of packages.
+ </para>
+
+ </note>
+
+ </step>
+ <step>
+ <para>
+ At this stage of the Kolab Groupware &PRODUCT_VERSION; development and release cycle, you may require to install the development repository as well. To do so, execute the following command:
+ </para>
+ <para>
+
+<screen># <userinput>yum -y install kolab-&PRODUCT_VERSION;-community-release-development</userinput></screen>
+
+ </para>
+ <warning>
+ <title>Development Repository Contains Unstable Software</title>
+ <para>
+ The development repository contains unstable software, in that new versions of the software can be released through the development repository quickly, for testing purposes, before they are approved to the updates-testing stage.
+ </para>
+
+ </warning>
+
+ </step>
+
+ </procedure>
+
+ <para>
+ Please consider using <application>yum-priorities</application> as described in <xref linkend="sect-Community_Installation_Guide-Prerequisites-Using_yum_priorities_to_Avoid_Package_Conflicts" />. This is necessary for Enterprise Linux releases prior to Enterprise Linux 6 only.
+ </para>
+
+ </section>
+
+ <section id="sect-Community_Installation_Guide-Prerequisites-Using_yum_priorities_to_Avoid_Package_Conflicts">
+ <title>Using <application>yum-priorities</application> to Avoid Package Conflicts</title>
+ <para>
+ Since any given package may, at any time, be or become available to the system through both the Kolab repositories as well as through the regular distribution repositories, to avoid the risk of switching back and forth between the two different versions continuously, by mistake or by accident, we recommend you use the following procedure including employing YUM repository priorities to eliminate the risk of running in such problems in the future.
+ </para>
+ <note>
+ <para>
+ This is necessary only for Enterprise Linux 5.
+ </para>
+
+ </note>
+ <procedure id="proc-Community_Installation_Guide-Using_yum_priorities_to_Avoid_Package_Conflicts-Installing_and_Configuring_YUM_priorities">
+ <title>Installing and Configuring YUM priorities</title>
+ <step>
+ <para>
+ The <application>yum-priorities</application> is available from the <ulink url="http://fedoraproject.org/wiki/EPEL">package repository</ulink>. Please install it:
+ </para>
+ <para>
+
+<screen># <userinput>yum install yum-priorities</userinput></screen>
+
+ </para>
+
+ </step>
+ <step>
+ <para>
+ The repositories that have been installed using the <literal condition="community">kolab-&PRODUCT_VERSION;-community-release</literal><literal condition="enterprise">kolab-&PRODUCT_VERSION;-enterprise-release</literal> package(s) have a pre-configured priority of <code>50</code>. The default repository priority is <code>99</code>. This will set the correct priorities, unless you have repositories configured other than the base operating system repositories (not including 'addons' and 'extras' on CentOS platforms), EPEL and the Kolab Groupware repositories. Should the system happen to already make use of YUM priorities, please make sure the Kolab repositories have the appropriate priority.
+ </para>
+
+ </step>
+
+ </procedure>
+
+
+ </section>
+
+
+ </section>
+
+
+</section>
+
+
More information about the commits
mailing list